JDcrawlers Messageboard

I am in need of a radiator for a 350b with reverser. I hit a log with the machine yesterday and it broke the support off the front that holds the grille (which come to my surprise it had broken before and the previous owner did a horrible job re welding it) and the screen pushed my radiator into the...

One more thing, when I get the motor out I want to put new rings on the pistons and possibly sleeves, Does anyone know if they are wet or dry sleeves?

Well I appreciate everyones sharing of knowlege and tips. I will probably be back once I begin to pull it out dont know when that will be but I will keep everyone posted... First gotta make sure it starts, has sat for a while.

Does anyone have an other possible causes/solutions? I would like to try everything before i decide to yank that reverser out (not looking forward to it)

I did notice the lever for the reverser has a lot of slop in it almost as if something is worn in the housing on the side

Oh the whole thing.... I was thinking the housing on the side where the linkages attach. Does that separate and is it possible something is wrong in the housing causing my problem rather then removing the whole thing? If so it would be worth the try rather than dissasembling half the machine

To remove the reversed under the floor do you need anything special to remove it as far as tools go? I took a look at it the other day and it doesn't look like its too much of a pain. Any ideas or tips for taking it off?

The reverser is not leaking. I will try to test it this weekend I do have a tech manual

I have the reverser so I cannot adjust the clutch pedal.

Hello Everyone I am new to the forum here. I have a John Deere 350-B diesel with a loader front. About 7 years ago I was using it and after it warmed up, the reverser in either direction acts as if it wants to go forward and reverse at the same time, seems to lock up and stalls the engine out. The m...