JDcrawlers Messageboard

I have a JD 350C and the final drive bearings went out on the spindle and was looking at new ones and john deere bearings are really expensive. But I don't have bearing numbers to check prices at the bearing shop. I was wondering if anyone would have the numbers for the spindle bearings and races. a...

I have a john deere 350 C that now the final drive is leaking around the drive output shaft. Is it possible to change the seal without taking th final drive off? Thank you[/i]

im putting my 350c back togetherand im about to refill the transmission and final drives and i im not sure how to fill the final drives, and was wondering if the transmission and final drives are all one oil resavor.

Somebody has had to buy a set of used rock guards, i am partsing out a used crawler and someone is interested in rock guards, but i have no idea that they are worth.
Mike

What is a good price for 350 rock guards and sprocket weights worth?
Both used and in good shape.
Thanks you
Mike

I have a 350c, and i had both steering clutches and tranny out and now that im putting it back together i cant rember how the self ajustment spring and screw went on the clutches and brake band if someone has a pic or a website i could look at it would be much appreciated.

thanks

I have the 2 reversers sitting on the floor, There is a 1/8 pipe plug in the B valve body like you said, in the c valve body the fitting is a 1/4 pipe thread. Can i take vavle body off the B and drill and tap? same goes for another pipe thread up on the reverser housing it self. they both go to the ...

Motor is out, would like to change what i call a clutch before i put reverser back in. the springs are very sloppy loose and i have a parts dozer that seems alot better shape.
Mike

How do you take off motor? do you need special tools?
Thanks Mike

Thank you very much for the info.
Mike

I have a 350 c dozer and the reverser is bad, i bought a 350 B loader, will the reverser and transmission work in my 350 C? im confused on how the clutch packs work, one is wet and other is dry.
Any info would be greatly appreciated.
Thanks for looking
Mike

I have a 350 c dozer and the reverser is bad, i bought a 350 B loader, will the reverser and transmission work in my 350 C? im confused on how the clutch packs work, one is wet and other is dry.
Any info would be greatly appreciated.
Thanks for looking
Mike