JDcrawlers Messageboard

losing grease will cause slack, put a new zerk in and see if that fixes the problem.

yes you have to remove the shaft, buy two belts and zip tie one behind the shaft so next time you need to change it you do not have to remove the shaft, and the belt is right there waiting. this is how mine is setup, the previous owner had done it and its a great idea.

i just replaced the injectors on my 350c and it runs better then it ever has since i purchased it, more power and it does not smoke anymore. i dont know what condition your injectors are in or if putting new ones in will help your problem, just sharing the experience i had. mine also lacked power an...

https://jdparts.deere.com/servlet/com.deere.u90.jdparts.view.publicservlets.HomeUnsigned If you register (which is free) it will ask you for your zip code, and find the nearest dealer when you select which type(s) of equipment you use. Once you do that, you can check pricing and availability of par...

the only place i could find them listed was greenvalleyparts and greenfarmparts neither of which could get them, do you have a link to the JD parts website you got them from? that would be great if i could get some, unless you got the last of them

i just had a couple springs break on my isolator, unfortunately before it blew it did the same noise thing right at start up but then went away after it fired up. been trying to get parts for about 3 weeks now, the spring retainers are apparently no longer available so i am going to have to try and ...

got the 1010 disk today and one of the mounting holes crosses paths with one of the dowel pin holes no matter which way you spin it, i dont want to try and weld it up and drill/tap through it so im going to order new springs, retainer clips, dowel pins, pilot bearing, and bolts to put the isolator b...

im not very good at this computer stuff either but i did this until someone that knows what their doing does it better

i got the flywheel dimensions for you richard center bore is 6" in diameter center bore is 1-3/4" deep the 5 hole pattern causes me not to be able to measure straight across but from one hole skipping one to the next is 12" would you happen to have a picture of the 1010 flywheel? i ended up welding ...

anyone know any special tricks to get the dowel pins out of the flywheel? ive tried before on numerous parts and can never get them out properly, not trying to save the dowel pins but i do want to save the holes they go in so i can put some new ones in if i cant get the 1010 plate to work and have t...

well now youve got me hoping again, i did some research to try to find out what the back side of the 1010 driven disk looks like and came up with this thread, which also happens to mention your name. http://www.jdcrawlers.com/messageboard/viewtopic.php?t=6589&sid=83ee50a6dcd47a7daa3c4cf987c2976e als...

just curious what is the dimension from the center of the flywheel to the outer bolt center? and about how deep and the diameter of the recess in the flywheel ive been wondering about the flywheel dimensions since i got home and found the older style driven disk set up, unfortunately i dont think t...

thanks for the replies guys i appreciate is this the proper way to put the retainer clips on? http://img861.imageshack.us/img861/2064/350b010.jpg am i correct in thinking this "Disc, Flywheel Driven" http://www.madisontractor.com/at316546-disc-flywheel-driven-54673.html is what the older 1010's have...

well after rebuilding my engine everything was good, then two days later two isolator springs decided they wanted to break and cause me to pull the engine back out. i did a lot of research and what i found is most recommend switching out to the later 350d style or the earlier 1010 style "clutch", we...

no unfortunately it did not gain any power, i am most likely going to throw a t3 turbo on it with an external electric oil pump and reservoir. it can be done for about 350$ including a new turbo, that is doing the work myself of course which would include fabricating the exhaust to accept the turbo....