Search found 95 matches
- Sun Mar 28, 2021 11:39 pm
- Forum: Late model JD crawler technical support
- Topic: Forestry mulcher
- Replies: 0
- Views: 4530
Forestry mulcher
What would you guys see as the feasibility of a 2200 lb 60 inch forestry mulcher on the front of a jd350 straight 6 way blade? Granted hydraulic flow and cooling were taken care of by a seperate engine on the back with enough cooling? Jd 450?
- Thu Mar 18, 2021 11:01 pm
- Forum: Off-topic discussions
- Topic: "Backwards" setup
- Replies: 0
- Views: 14508
"Backwards" setup
What types of crawlers were changed to drive in reverse with driver facing backwards if any? Like forklifts... and info of the clutch/steering mechanisms? May include john deere if allowed...
Looking to make something like a tracked skidloader for a forestry mulcher
Looking to make something like a tracked skidloader for a forestry mulcher
- Thu Oct 19, 2017 2:33 am
- Forum: Early model JD crawler technical support
- Topic: concept of track wear
- Replies: 5
- Views: 5535
Re: concept of track wear
Thanks guys, for some reason I wasn't getting g my notifications and ive been pretty busy otherwise. Thanks for all the info!
- Thu Oct 19, 2017 2:32 am
- Forum: Late model JD crawler technical support
- Topic: concept of track wear
- Replies: 4
- Views: 4534
Re: concept of track wear
Thanks guys, for some reason I wasn't getting g my notifications and ive been pretty busy otherwise. Thanks for all the info!
- Thu Oct 19, 2017 2:31 am
- Forum: Off-topic discussions
- Topic: case 530 backhoe attachment
- Replies: 2
- Views: 4012
Re: case 530 backhoe attachment
Thank you. Valve has to be rebuilt before I can do anything anyway. I did get it. waiting for the valve to come back. (I have too many irons in the fire and this guy does a good job)
- Sun Oct 15, 2017 1:42 pm
- Forum: Late model JD crawler technical support
- Topic: concept of track wear
- Replies: 4
- Views: 4534
concept of track wear
In trying to find out the wear of chains, I only see references to guying the proper gauge to figure it out. Why is this? I have seen it enough times that i believe there must be some truth to it.. but cant figure out what the difference is in finding doing measurements and going from there. Again, ...
- Sun Oct 15, 2017 1:41 pm
- Forum: Early model JD crawler technical support
- Topic: concept of track wear
- Replies: 5
- Views: 5535
concept of track wear
In trying to find out the wear of chains, I only see references to guying the proper gauge to figure it out. Why is this? I have seen it enough times that i believe there must be some truth to it.. but cant figure out what the difference is in finding doing measurements and going from there. Again, ...
- Sun May 14, 2017 6:59 am
- Forum: Off-topic discussions
- Topic: case 530 backhoe attachment
- Replies: 2
- Views: 4012
case 530 backhoe attachment
trying to do some research to figure out how a 530 case backhoe attachment will work on my 4020 Its been setup with a dray attachment, so it should save on the 3 point. 4 gpm for just the tractor 5.5 for the tractor w loader 11 for the tractor w loader and backhoe but then shows 22 gpm for the total...
- Mon Oct 24, 2016 10:18 am
- Forum: Off-topic discussions
- Topic: Allis Chalmers wd45 brake job
- Replies: 6
- Views: 6049
- Sun Oct 23, 2016 7:54 pm
- Forum: Off-topic discussions
- Topic: Allis Chalmers wd45 brake job
- Replies: 6
- Views: 6049
Allis Chalmers wd45 brake job
Just finished up a brake job for a buddy of mine... Wd 45, had to replace one of the brake drums, reline the shoes, and had a few attempts trying to get the new brake drum on, took it to a machine shop to have it reground a few thousandths and still had to chill the shaft with dry ice and heat the d...
- Sun Oct 02, 2016 1:59 pm
- Forum: Off-topic discussions
- Topic: International U111 backhoe
- Replies: 2
- Views: 3485
- Sat Oct 01, 2016 7:13 pm
- Forum: Off-topic discussions
- Topic: International U111 backhoe
- Replies: 2
- Views: 3485
International U111 backhoe
Went and looked at a few - 111 backhoe attachment from what I believe to be a 3400 International backhoe... The guy says it weighs 3000 to 3500 pounds, and it has been converted for a three-point lift... I would be running a John Deere 4020 to power this bad boy... I'm a little bit worried it's a bi...
- Sat Aug 20, 2016 5:21 pm
- Forum: Late model JD crawler technical support
- Topic: carb probs
- Replies: 3
- Views: 3910
- Tue Aug 16, 2016 11:42 pm
- Forum: Late model JD crawler technical support
- Topic: carb probs
- Replies: 3
- Views: 3910
carb probs
350 straight... gas tsx907 Lavoy, you have any solenoids/valve kits? So i just rebuilt the carb on it after an engine rebuild, (i figure after rebuild i must have loosened some crap up in the trauma of it all, and the carb leaked all of the gas onto the floor, so i rebuilt it, i should have looked i...
- Sat May 28, 2016 8:43 pm
- Forum: Late model JD crawler technical support
- Topic: Rebuilt engine break in-oil recommendations
- Replies: 8
- Views: 6715