JDcrawlers Messageboard

are you going to list track adjusters?

I did a bit more digging on this and looked for a 350B service manual on line. I found one (pretty poor as I didn't want to buy it), but in a preview I can see it has basically the same notes in several places as the 2020 (4 cylinder) manual I have. To service the crank and main bearings, the engin...

I am rebuilding my 350 B dozer engine. The oil pump lower gear oiler adapter that is mounted on the front of the under carriage prevents me from removing the front bearing cap. Manual doesn't mention how to remove it?
Any advice?

I have a 3310 winch on a 350 crawler. The manual says to tighten the adjusting nut until the spring in the lower housing is 3-3/8" long. There is no way this spring, which is about 4 1/2 inches long, will compress that much by turning the adjusting nut. Is there another method to adjust the brake ba...

I have a straight 350, with a 3310 winch and logging arch. I am not sure about the wide or narrow differences but I would prefer a rear screen. Currently there are no mounts on the tractor.

Does anybody have a used ROPS for a 350?

I just bought a 350 with a 3310 winch. Looks like water has been sitting in the controller reservoir for a while. I might be able to free it up, but the valve walls could be seriously pitted.

Does anyone know where I may be able to get a useable controller?