Search found 4 matches
- Thu Mar 21, 2013 5:55 pm
- Forum: Early model JD crawler technical support
- Topic: 440ic loader bucket teeth
- Replies: 0
- Views: 2116
440ic loader bucket teeth
Does anyone out there happen to know the part number of a jd 440ic bucket tooth or an aftermarket number ?
- Fri Feb 22, 2013 11:24 am
- Forum: Early model JD crawler technical support
- Topic: 440 track frame removal
- Replies: 9
- Views: 6916
440 track frame removal
the front has 2 flanges with 4 bolts holding them together. That flange is loose. The rear has NO clamp, just 2 flanges held together by 4 bolts. Today I saw that 3 bolts were broken off so that makes it next to impossible to rotate the track frame because the broken bolts are still in the flanges. ...
- Thu Feb 21, 2013 6:26 pm
- Forum: Early model JD crawler technical support
- Topic: 440 track frame removal
- Replies: 9
- Views: 6916
track frame
thank you for the info. I did not know the front only went in about 1/2 inch. I will try what you suggested
- Thu Feb 21, 2013 3:14 pm
- Forum: Early model JD crawler technical support
- Topic: 440 track frame removal
- Replies: 9
- Views: 6916
440 track frame removal
I am trying to get my track frame off my 440 crawler. all 8 bolts are out and the crossmember tube is loose on the middle crossmember. The bolts are out of the rear crossmember tube mount and it is frozen on the tube. i am out of ideas on how to get it to loosen up. Tryed heat, pullers, sledge hamme...