Search found 32 matches
- Thu Oct 27, 2016 2:17 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Thanks Lavoy. Not too many machine shops anymore, CNC shops.
- Thu Oct 27, 2016 1:19 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Lavoy I gotcha. When I used to work on steam turbines , we used what you call a body bound bolt. It was fitted by machining bolt to fit hole, then stretching it. The easiest thing would be to use rivets. Where would a person find the correct rivet to install ? Is there any way to see the ring gear w...
- Wed Oct 26, 2016 11:24 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Thanks for the info. Too bad there isn't an inspection plate . (in repair manual) I guess I could take rear cover off pg. 90 item 32-34 and see if shaft turns.
- Wed Oct 26, 2016 3:34 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
So, item 9 on page 89 has rivets instead of bolts. What you've described is exactly what I'm experiencing. Did you put rivets back or use grade 8 bolts ?
Thanks.
Thanks.
- Mon Oct 24, 2016 6:31 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Ok thanks. I'll be checking it out soon and will be getting back with you all.
- Sun Oct 23, 2016 10:11 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Thanks Lavoy. I believe I'm going to do some more troubleshooting and inspecting before starting to remove motor. Everything worked well on machine until I let it freewheel backing off incline. Top of transmission should be easy to see into trans. It's like something backed off when I let it freewhe...
- Sat Oct 22, 2016 5:37 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Is there any inspection plates/covers that can be removed to see clutch linkage ? I'd hate to pull engine and find something else wrong
- Sat Oct 22, 2016 9:43 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Thanks Lavoy. So what I'm thinking the only way to see the internals is to remove the engine ? ...weather's turned bad here in Wv. Next opportunity I'll check that out.
- Sat Oct 22, 2016 4:48 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
The reason I say I don't have a reverser, I only use transmission shifter to to go backwards. No other lever to choose How do I get to the area to check coupler on drive shaft ? Is there enough room for the coupling to slide off splines ? The parts drawing looks to have been OVER copied, can't tell ...
- Fri Oct 21, 2016 8:19 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
Where is the reverser located ?
- Fri Oct 21, 2016 8:18 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
I don't have a reverser, gas engine with manual transmission
- Fri Oct 21, 2016 7:13 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
1010 drive line issues
Ok where is the clutch valve, next to the sky hook ? lol
- Fri Oct 21, 2016 6:04 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 driveline issues
- Replies: 24
- Views: 16742
JD 1010 driveline issues
I was using my 1010 to spread some gravel on a steep part of a driveway. I pushed clutch in and let it free wheel back down slope. Afterward there's no forward or backward motion. No noise, acts like it's in neutral. I've looked at the repair manual and don't see where I would need to check first. I...
- Wed Jun 04, 2014 4:51 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 gas crawler steering clutch adjustment
- Replies: 5
- Views: 6307
JD 1010 gas crawler steering clutch adjustment
Well I guess if I had one I could follow it. Anybody know where I could find one?
- Tue Jun 03, 2014 5:04 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 gas crawler steering clutch adjustment
- Replies: 5
- Views: 6307
JD 1010 gas crawler steering clutch adjustment
Can any one out there give me the procedure for adjusting steering clutches and brake bands?