Search found 21 matches
- Sun Jun 29, 2008 9:27 am
- Forum: Late model JD crawler technical support
- Topic: 555 crawler loader
- Replies: 5
- Views: 5890
555 loader
thanks for the help
- Wed Jun 25, 2008 8:35 am
- Forum: Late model JD crawler technical support
- Topic: 555 crawler loader
- Replies: 5
- Views: 5890
555 crawler loader
Anyone want to try to explain the removal of the first gear clutch pack for me. Can't find my manual must have gotten lost in the move. Thanks.
- Sat Jun 21, 2008 1:17 pm
- Forum: Late model JD crawler technical support
- Topic: 550G final drive
- Replies: 1
- Views: 2905
550G final drive
I was given a 550G if I can move it. The final drive went down and was taken apart, all that is left is the drive housing. Is it possible to put just the axle in the housing so I can put the track back on to load it. Could probably do it without the track on but it is not in the best place to load. ...
- Sun Mar 23, 2008 7:31 pm
- Forum: Late model JD crawler technical support
- Topic: 350 frame
- Replies: 4
- Views: 4928
350 frame
Fixed mine a couple of times just seemed to get worse each time. Finally broke down and put 2 new ones on tightened all the bolts and put it back. Bolts from transmission to reverser work loose easily mine were broken so had to fix that too.
- Sun Mar 02, 2008 7:19 pm
- Forum: Off-topic discussions
- Topic: robert bosch pes injector pump
- Replies: 0
- Views: 2814
robert bosch pes injector pump
Anyone worked on a Robert Bosch pes injector pump can't seem to find anyone on any forums that knows much about them.
- Mon Jan 21, 2008 7:33 pm
- Forum: Late model JD crawler technical support
- Topic: 350 parts on Epay
- Replies: 2
- Views: 4190
350 parts on Epay
Saw a head and valves and a track widening kit for sale track kit looks useless but chains look brand new. 280193453685 170186408964
- Fri Dec 28, 2007 11:13 am
- Forum: Off-topic discussions
- Topic: homemade track press
- Replies: 4
- Views: 7334
track press
thanks Ill check it out.
- Fri Dec 28, 2007 10:18 am
- Forum: Off-topic discussions
- Topic: homemade track press
- Replies: 4
- Views: 7334
track press
I have already put pins and bushings in my deere 350 once with a 90 ton shop press took a while but worked. Put pins and bushings in my case 350 with a log splitter and a few shop built attachments. I own a machine shop and welding shop and work for mining industry with unlimited availability to hyd...
- Thu Dec 27, 2007 8:10 pm
- Forum: Off-topic discussions
- Topic: homemade track press
- Replies: 4
- Views: 7334
homemade track press
Not exactly sure how but I am soon to begin on a homemade track press. Want it small enough to do the old 350 Deere but large enough to handle my Case 850B loader. Any Ideas.
- Tue Jul 04, 2006 8:41 pm
- Forum: Late model JD crawler technical support
- Topic: 350 transmission shaft
- Replies: 1
- Views: 4935
350 transmission shaft
Looking for a used input shaft part# T23653 or a place to get a good aftermarket. Thanks for the help.
- Thu Jun 22, 2006 3:02 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 350 JD parts machine
- Replies: 0
- Views: 2849
350 JD parts machine
Looking for a 350JD parts machine or good salvage yard within 100 or so miles of zipcode 24271 in southwest Virginia. Any help would be greatly apprecitaed.
- Mon Jun 19, 2006 6:14 pm
- Forum: Late model JD crawler technical support
- Topic: 350 side frame
- Replies: 2
- Views: 5563
350 side frame
I am looking for a Right side frame part# AT18582. A parts dealer says she has a new one with part # AT36818. I tried to cross the numbers but could not find a match. She says this frame part replaces my # and fits 350,350B,C and any other 350. Does anyone know if this is right. If one off a 350B fi...
- Mon Jun 12, 2006 7:59 pm
- Forum: Early model JD crawler technical support
- Topic: JD 40 crawler
- Replies: 0
- Views: 2506
JD 40 crawler
Was on www.ytmag.com saw a jd40 crawler for sale, has blade 5 roller owners and repair manual. Thought some of you guys might be interested. Its in Montana near Missoula.
- Thu May 18, 2006 8:27 pm
- Forum: Late model JD crawler technical support
- Topic: 2010/350
- Replies: 2
- Views: 5969
2010/350
Have an offer to buy a 2010 crawler dozer cheap, already own a 350. Wondering if any of the major parts will interchange. 2010 tracks and tensioners are worn out it does have a winch. 64 model I think. 350 is a 68 model.
- Sat May 13, 2006 7:24 pm
- Forum: Late model JD crawler technical support
- Topic: inside 350 blade
- Replies: 0
- Views: 4075
inside 350 blade
I have a 350 JD with outside blade, found an inside blade. Does anyone have a picture or diagram of the mounting of the inside blade, brackets and hydraulic cylinders.
Thanks
Thanks