JDcrawlers Messageboard

What condition are the old ones? I would try and find someone to rebuild the old ones if possible. New cylinder can get pricey.

I didn't take it apart yet. My last visit to the mountain it was 0 degrees!!!! I was not laying in the snow and dropping the pan. I unscrewed the gauge and just a little oil came out. I don't know what else it can because there isn't much to the system. Next year it will be parked inside the garage ...

We put new engine bearings about two years ago. I don't know what else to be looking for. Any suggestions?????

Exactly!!! The first time was ice. Took it all apart cleaned everything fresh oil and it was fine. Machine sat for about 2 months it had no trace of ice but had no pressure. I found a few pumps on ebay that look the same but they are listed for different machines. Are the pumps the same in all those...

A few months ago I had no oil pressure and the roll pin on the drive gear had snapped off. I fixed that and everything was fine. A few weeks ago I needed my baby to plow snow and no oil pressure again. I cant imagine whats going on but I just wanted to buy a new pump install it and be done. Now I do...

Engine oil pump

Im looking for a new oil pump for my 420 and not having any luck finding one. Looking for help.

What is included in that kit?

Im in the process of rebuilding one of my final drives. Having a hard time finding axle bearings and seals because my numbers are no good. Where can I find parts?

Thanks
Dave