JDcrawlers Messageboard

With no track on how far back should that slide? Have taken plug to let greese out. Thanks

any after market places to get one. thanks

How hard would tracks be on some older cement in a cattle lot. Need to get some cleaned and hauled, so skid loader will have it alittle easier. The tracks on the loader are just smooth pads not putting hardly any down preasure on bucket just enough to peal off manure its dry from cement. So from one...

Also when in there, this one had a bracket on each side of housing to the side frames 2 bolts on each bracket. One side comletely gone bolts were broke in housing no way to get out so local welder welded an iron plate from frame to housing its in there now. Other side seemed to look all right didnt ...

If you go into the clutch housing if there isnt a drain hole in the bottom make one. This machine there wasnt one that we could find, clutch was rusted right to the fly wheel, throw bearing stuck in the on postion, had to cut it off.. A pool of water maybe, some oil in the bottom, couple of quarts o...

Just put in a new engine clutch it would not move with the HLR. There is a valve that works with the clutch pedal its inside the clutch housing it is adjustable from a hole off to the side of the air cleaner canister on the top side of the clutch housing.It regulates how much oil from transmission g...

''Sounds like the ole girl has been treated rather rough. Good luck with it and hope you get it sorted out soon'' Thanks, it was a consignment sale pruchase just happened to find it day of sale, or if known it was there would have looked it over a couple days before, thought it would be handy on the...

""What I wanted you to try was move the machine up against something solid and then force the machine forward against this object while holding the clutch that you wanted to get unstuck. Just to clarify..."" Understood and did do that at just engine idle or alittle better it just kept turning did it...

The 450 crawler loader is running and steering will call this an experiment. I did not run it into a tree or rock this poor machine has had a tough enough life, just tightened the brake band, and run it up down a slope in the drive way. I will report back when the clutch fails and we have to pull it...

Well the clutch let loose. Soaked in wd40 for 2 days. So will see how the clutch discs get along. I just ran it up and down a part of the drive way and tigtend up the brake band it didnt want to go but finally let go.This machine has had a tough life from its previous owners couldnt do the tree thin...

When the clutch was out the JD people cleaned it up bead blasted the rust out. They thought the clutch parts after cleaned looked good almost new so they put it back together checked the preasure plate. We put in a new throw out bearing put back together adjusted it and it worked up until the last 2...

We just put in a new engine clutch, it was rusted together in the on postion. The fella helping us is a JD mechanic never seen such a mess. Who ever had this before had adjusted the power shift valve in the clutch housing to make you think the clutch was doing the work. We were in there because the ...

Just had this clutch out about 4 months ago and used it for 2 months before starter exploded and jamed flywheel had to to take engine out to get pieces of the starter gear out of flywheel. Inside good shed just got it to running again now that clutch is stuck on. Going to soak it with something beca...

Its an old plain and a "pain" 450. The steering clutches are dry had one out rusted up. The "final drives, I bleieve ,have checked them are seperate they have 90-140 have check and fill plugs each side. The loader pump up front of radiator has its own resiverior beside seat. The power steering pump ...

Does that dip stick under seat on a 450 HLR Transmission check the ring gear,speed change, and range change compartments.or Iam I missing another check, have the owners and service manual and it looks like the one stick takes care of all 3 compartments. Sometimes these books for me arent the best. T...