JDcrawlers Messageboard

Hi Lavoy and Mini. Thanks for the advice. Yes Lavoy, I agree that any attachment would likely be overpowered. My plan is to use the quick attach for a forklift around the shop, I have a old one off a JD 145 loader, and a off the shelf bucket for loose dirt and snow. I am not going to alter the origi...

Hello everyone
Do any of you have any experience with adapting the four pin setup to the "universal " quik tach setup to utilize skid steer type attachments. I have not had any luck finding anyone who makes these adapters.
clayton

Hi Lavoy
I received the new Bull Gear with no problem. It was packed very well. It fit the old shaft quite snugly, but we used the Locktite as you suggested. We are back in the woods ready to go!
Thanks for all of the help
Clayton

Hello Everyone I have a 1010 crawler loader that has had the engine replaced so no tag. However based on part number breaks I think that it is between 24694 and 31000. I need a gear in the final drive. The part number in the book is AT13081T, but the numbers on the gear itself is T14588T and T17481T...

Ok, thank you, i did not know that Lavoy dealt in used parts. Lavoy, do you have a lever and detent ball? If so how much would these items be? I do not know the exact serial number for my unit as the engine has been replaced, but based on going through the parts book i think that it is between 24694...

Lavoy is correct, the serial number break for this disconnect is 21901 and up. Does any one know where i might find the lever and ball assembly for this? I have seen a "Farmer John" on ebay with parts for sale, anyone have any experience with him?

Yes, mine does have this assembly. However the handle with the ball detent is missing and the rod that actuates it seems to be froze up. I have been putting PB Blaster on it and will try to find a handle for it.

Thanks

Thanks you guys for the help and advice. I used it to plow snow yesterday and the float feature worked great! This site is such a great resource for guys like me who have never owned a crawler anything before and know less than nothing about them. Thanks again for the information and to Lavoy for ho...

ok, thank you. Then what is this position used for?

Good Morning I have a 1962 1010 with the 810 loader. If i push the loader joystick all the way forward (to lower the arms) it will "stick" in this position. I think that this is called the float position. My question is will this help keep stress off the hydraulic pump during cold weather starts? In...

Good morning Everyone I have a 1962 Crawler Loader, Anyone happen to know the weight of the cast nose piece? I need to take the pump off and was wondering how big a hoist i will need. Also anyone know the capacity of the hydraulic system of this loader? Is it the same four gallons as the non-loader ...

Hello
I have a JD 1010 Crawler Loader. Does anyone have production dates based on the serial number on the loader? This one is 5091. The engine has been replaced in this machine and i am trying to determine the year of the whole unit

Thank you
George