JDcrawlers Messageboard

anyone know where to get bushings and pins for the tilt ? thanks

do any of you guys have experience with running a dozer (without) the rock guards installed? the bolt holes are so rusted and deteriorated that I would have to remove the rails and retap all of them. I will be using the dozer in mostly dirt only. but I don't know if they add strength to the rails .....

350B steers normal to the right, but have to pull the lever extremely hard to left for it to eventually go that direction. does anyone know if this might be steering clutches or brake band? im new to working on these and this machine has been sitting for a long time. thanks for any help or advice

Yea I did call you mark , thanks I'm gonna holler back at u later when I know more about what I need, thanks for the parts you sent

all that stuff is off, i had the engine out, replaced it and the oil is puoring from between the reverser and the engine, i can see all the cooling lines, it ran all te fluid out of the reverser, to the point it wont mave anymore, which leads me to believe its the reverser ..is there a seal behind t...

Oil is pouring out between the engine and reverser assembly and the machine quit moving, I know I have to take the engine out, does anyone know what to look for in the reverser ? Do I have to take it out as well ? Thanks guys

Can the reverser be taken apart with the unit still mounted in the dozen? The engine is out .. Thanks for any help

my isolator is gone, any suggestions on what to replace, ive heard about upgraded type flywheel , what fits what on the 350B model ?

thanks for any help

I got it out today my problem is broken bolt on the isolator...

Anyone know about the bottom bolts on these dozers. Can the engine be jacked up high enough to get the bolt in the bottom left hand side of the machine out.. frame rail is in the way otherwise. Thanks for any help