Search found 6 matches
- Sat Mar 29, 2014 1:11 pm
- Forum: Early model JD crawler technical support
- Topic: 1943 BOLindeman roller help
- Replies: 4
- Views: 3600
- Fri Mar 28, 2014 3:20 pm
- Forum: Early model JD crawler technical support
- Topic: 1943 BOLindeman roller help
- Replies: 4
- Views: 3600
Lindeman track frame spacing
My 43 Lindeman also needs new track frame bolts and spacers. What should the spacer length be? I measured and they all vary between 7 to 7.5 in? Does it depend on how much the roller bearing sleeves and the rollers are worn? or does it depend on the roller shaft length?
Neil
Neil
- Thu Mar 27, 2014 11:28 pm
- Forum: Early model JD crawler technical support
- Topic: 1943 BOLindeman roller help
- Replies: 4
- Views: 3600
1943 BOLindeman roller help
Still working on replacing my track pads - slowly - but stated to looking at the 3 rollers. I have a few end caps (TE45 , TE46) with cracks on the OD. Are they shot or can they be welded. I see you have some for sale Lavoy. Also I have some TE45Y, can I use them instead? Also some of the track rolle...
- Fri Sep 13, 2013 1:37 pm
- Forum: Early model JD crawler technical support
- Topic: Track pad bolts for Lindeman
- Replies: 7
- Views: 5439
Update, the local dealer has the track pad bolts for $15 ea. He told me they were 1.4 in long. Local hardware has the 1.5 inch long carriage bolts for $0.90 plus nut & lock washer. I bought a couple to see if I could make them work. The actual bolts I removed from the track were 1.6 in long. I did g...
- Mon Sep 02, 2013 1:09 pm
- Forum: Early model JD crawler technical support
- Topic: Track pad bolts for Lindeman
- Replies: 7
- Views: 5439
Thanks for sharing all your knowledge about crawlers on this site! I'm a newbie for sure on crawlers. My Lindeman (with blade), was sitting outside for about 7 years under a blue tarp before I bought it. All the fluids were about half water. Engine was stuck but came loose fairly easily. The back pl...
- Sun Sep 01, 2013 1:07 pm
- Forum: Early model JD crawler technical support
- Topic: Track pad bolts for Lindeman
- Replies: 7
- Views: 5439
Track pad bolts for Lindeman
I scored a bunch of pads and need to know the right bolts/nuts to use. Do they make them specific for the application or will any carriage bolt work? Do they need to be heat treated and what is the length?