Search found 58 matches

by theshanmand1!
Sat Feb 19, 2022 9:00 am
Forum: Early model JD crawler technical support
Topic: Holt winch info search continues
Replies: 0
Views: 2441

Holt winch info search continues

good morning all. Holt winch info search update. I have just about given up many times and then i find something that keeps me on the search! Spoke with dan @ thompson equipment, he said Jeff Huff with Huff equipment & call Camp 18 museum in oregon, spoke with All of those fine gentlemen and came u...
by theshanmand1!
Sun Feb 13, 2022 4:19 pm
Forum: Early model JD crawler technical support
Topic: 1958 420C Holt Winch
Replies: 4
Views: 2723

Re: 1958 420C Holt Winch

Thank you so much Jim,
I appreciate the input & advice very much &
i will pay closer attention when i post.
Have a great day!
Shanon.
by theshanmand1!
Sun Feb 13, 2022 3:03 pm
Forum: Early model JD crawler technical support
Topic: 1958 420C Holt Winch
Replies: 4
Views: 2723

Re: 1958 420C Holt Winch

Dadgummit, i did it again!
Thanks Jim, i have some gasoila compound that should do it!
Is there a way for me to copy & paste my post to the early model forum?
Thanks again
Shanon
by theshanmand1!
Sun Feb 13, 2022 12:46 pm
Forum: Early model JD crawler technical support
Topic: 1958 420C Holt Winch
Replies: 4
Views: 2723

1958 420C Holt Winch

Good morning to all! Slept good last night after wrastling the 5/8 winch cable off the drum, that looked like it had been there since 58! Drum was froze solid with the old cable on her, once removed, she works as should! Yeah!!! Drained 80/90 & water out. Tried to get drain plug out, wont budge! Som...
by theshanmand1!
Wed Feb 09, 2022 5:10 pm
Forum: Early model JD crawler technical support
Topic: 1958 JD 420c with Holt winch
Replies: 0
Views: 2565

1958 JD 420c with Holt winch

Hello,
i was wondering if anyone has any leads on info, manuals, literature, anything on a Holt winch.
I can find nothing on Holt winches on JD Crawlers.
i would like to learn about the one that is mounted to my
Johnny popper.
Thanks,
Shanon.
by theshanmand1!
Thu Jan 10, 2019 10:26 am
Forum: Early model JD crawler technical support
Topic: Single remote control valve
Replies: 6
Views: 4993

Re: Single remote control valve

Thanks Jim,
Yes Lavoy is the man, he has helped me out many times. Hoping he replies.
Yes i have a parts book & all service manuals.
For the 1956-1958 420C
by theshanmand1!
Thu Jan 10, 2019 6:58 am
Forum: Early model JD crawler technical support
Topic: Single remote control valve
Replies: 6
Views: 4993

Re: Single remote control valve

Thanks Jim, I also read, that some came with it & some did not, & how to service each. Hard to believe that puppy is $560 @ JD parts house! I am hopeful that a new seal will rectify the leak. I have been researching brake band reline material & rivets, not having much luck finding a outlet here on t...
by theshanmand1!
Wed Jan 09, 2019 3:29 pm
Forum: Early model JD crawler technical support
Topic: Single remote control valve
Replies: 6
Views: 4993

Single remote control valve

Hello all, happy new year. I was plowing the driveway over the holidays when i looked over at the single remote control valve and noticed it was pouring hyd fluid out of the upper housing check valve port. New seals & snap rings are ordered. The lower port thermal relief valve has been missing since...
by theshanmand1!
Tue Oct 10, 2017 6:08 am
Forum: Early model JD crawler technical support
Topic: outside track mount, angle blade
Replies: 3
Views: 3835

Re: outside track mount, angle blade

Thanks lavoy, your the man!
What's the most I should give for it?
Thanks again.
by theshanmand1!
Sun Oct 08, 2017 7:29 am
Forum: Early model JD crawler technical support
Topic: outside track mount, angle blade
Replies: 3
Views: 3835

outside track mount, angle blade

hello all, hope all are well. I haven't been on for a while. feb. of this year I went over to plow the driveway, and decided, after, that I would start to research finding a angle blade for my crawler, as my Holt blade is not. to the point, there is a gentleman on CL that is parting a 440, with outs...
by theshanmand1!
Thu Mar 02, 2017 1:38 pm
Forum: Early model JD crawler technical support
Topic: 420 hyd issue
Replies: 8
Views: 7067

Thanks O-Possum, Will do. As I tapped the throttle up with the palm of my hand, she shot to full throttle On its own, quickly I tried to throttle down, but nothn doin. Turned key off. It did that twice. Never had before. After working the throttle back and forth fired it up And ran fine the rest of ...
by theshanmand1!
Wed Mar 01, 2017 2:01 pm
Forum: Early model JD crawler technical support
Topic: 420 hyd issue
Replies: 8
Views: 7067

Thanks Stan,
Im planning on tearing into it this summer to see what I can find, the list is growing😉
by theshanmand1!
Wed Mar 01, 2017 11:40 am
Forum: Early model JD crawler technical support
Topic: 420 hyd. Issue
Replies: 3
Views: 3258

I suppose I had better open my manual & get busy educating myself on that aspect of my crawler.
Thank you Lavoy.
by theshanmand1!
Wed Mar 01, 2017 8:25 am
Forum: Early model JD crawler technical support
Topic: 420 hyd issue
Replies: 8
Views: 7067

Hyd issue & throttle issue

Hello all, Plowed the drive over the holiday weekend, she had been sittn since summer. Fired up on 2nd pull, no choke! Wow! Still did the same thing with the hyd. Will have to troubleshoot it this summer Also, a different issue came up, twice when I tapped the throttle up, it went to full throttle,a...
by theshanmand1!
Mon Feb 13, 2017 7:59 pm
Forum: Early model JD crawler technical support
Topic: 420 hyd issue
Replies: 8
Views: 7067

420 hyd issue

Notmeu, thank you for your reply. I filled the tank with the blade on the ground, check the level on the hyd dipstick prior to each use, & since all of the leaks have been fixed, have not had to add any for a while. I will admit though, now that i am thinking about it that when i had the front end o...