Search found 11 matches
- Tue Apr 29, 2014 7:55 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 headache
- Replies: 19
- Views: 14254
- Sat Apr 26, 2014 8:36 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 headache
- Replies: 19
- Views: 14254
well, I nickel rod welded my cracks in my pan. Didn't turn out too bad considering. used a 100 watt light bulb to preheat and postheat. Temp was almost too hot to touch when I started. Left it on after all night. Richard, there is a petcock drain on the left side of the block. When I first cracked i...
- Wed Apr 23, 2014 7:49 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 headache
- Replies: 19
- Views: 14254
Well. Thank you for all the help. It seems the pan has been off and whom ever put it back on used somesort of epoxy resin on all the pan sealing surfaces. The engine being in the machine getting made it more of a challenge. Between using a wonder bar to get the angle up past the frame and an old woo...
- Sun Apr 20, 2014 7:44 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 headache
- Replies: 19
- Views: 14254
- Sun Apr 20, 2014 7:22 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 headache
- Replies: 19
- Views: 14254
- Sat Apr 19, 2014 9:02 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 headache
- Replies: 19
- Views: 14254
2010 headache
Well I'VE STARTED tearing my 2010 gas engine apart. It will need MAJOR work to really go. My 1st cyl. had lots of rust. the 4th has a scar, maybe from the wrist pin. Thought if I could just get it running to see if drive train, reverser, clutches MIGHT work. There was no oil to run out the drain as ...
- Sun Jan 19, 2014 5:10 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 compression
- Replies: 1
- Views: 2132
2010 compression
I read in the manual the minimum cylinder compression is 125lbs on the gas engine. I hope to look at a replacement one. I will do a check on each cyl before id buy. on a good used engine what should I expect to still be a usable one ? Thank you.
- Wed Jan 15, 2014 9:34 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 mistake
- Replies: 10
- Views: 7527
- Wed Jan 15, 2014 9:04 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 mistake
- Replies: 10
- Views: 7527
2010 mistake
well a few months back I asked opinions about a 2010 crawler loader. I bought it and got stuck . #1 cylinder was rusted and oil pan is rusted through. I came across a wheeled 2010 with transmission troubles. he wants 1900 for the running tractor. I am not sure if the 3pt arms will fit other model tr...
- Sun Sep 22, 2013 7:20 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 crawler loader
- Replies: 5
- Views: 4644
- Sat Sep 21, 2013 8:43 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 crawler loader
- Replies: 5
- Views: 4644
2010 crawler loader
I have been looking for a dozer to use on fence rows and a coworker said he has a 2010 gas crawler loader he doesn't need. long story shorter it has not ran for 6+yrs. It was shedded till a year ago when he needed the space, he tried to start it but mice had been there. He got it to spin over but it...