Search found 223 matches
- Wed Nov 08, 2023 8:02 pm
- Forum: Early model JD crawler technical support
- Topic: 440 back firing
- Replies: 9
- Views: 8206
Re: 440 back firing
Coil should be 6 volt. Make sure that centrifugal advance in distributor is not stuck and will return ok if you turn the rotor against direction of rotation and then let it go. It should return with a definite click. Could be stuck or have broken/weak springs.
- Thu Jun 08, 2023 6:08 am
- Forum: Early model JD crawler technical support
- Topic: Track Alignment on 40c 4 roller
- Replies: 2
- Views: 5205
Re: Track Alignment on 40c 4 roller
OK. Through trial and error, I found that if I tighten the track (move the idler forward) on the side with the most clearance, that solves the problem. I did this with the tractor lifted on the side I was working on so I could run that track after each trial adjustment. I'll see what happens after I...
- Mon Jun 05, 2023 12:01 pm
- Forum: Early model JD crawler technical support
- Topic: Track Alignment on 40c 4 roller
- Replies: 2
- Views: 5205
Track Alignment on 40c 4 roller
I have recently done some work on my undercarriage-rollers, idler track chain etc. and now need to adjust my track alignment. I have both the JD Service Manual and the the JD Operator's Manual. I am a bit confused. The Service manual says "tighten adjusting nut on tension bolt at side of track frame...
- Fri Dec 23, 2022 8:25 pm
- Forum: Early model JD crawler technical support
- Topic: 40c 4 roller track alignment
- Replies: 4
- Views: 2345
Re: 40c 4 roller track alignment
Makes perfect sense but would never have thought of doing it that way. Should patent that tool-a string and a nail
- Fri Dec 23, 2022 5:23 pm
- Forum: Early model JD crawler technical support
- Topic: 40c 4 roller track alignment
- Replies: 4
- Views: 2345
Re: 40c 4 roller track alignment
Sounds good Gus. I'll give it a try. Thanks.
- Thu Dec 22, 2022 1:47 pm
- Forum: Early model JD crawler technical support
- Topic: 40c 4 roller track alignment
- Replies: 4
- Views: 2345
40c 4 roller track alignment
OK, I am confused (which is nothing new). I installed a new to me track on my crawler and am trying to align it properly. According to the Service Manual, I should "tighten the adjusting nut on tension bolt at side of track frame that shows the most clearance between the idler flange and track link"...
- Tue Dec 06, 2022 11:28 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic winch on a 40c
- Replies: 2
- Views: 1982
Re: Gearmatic winch on a 40c
Thanks Lavoy. I'll see what happens. If I can get the winch at a decent (low) price, then I will worry about finding the shaft.
- Mon Dec 05, 2022 7:29 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic winch on a 40c
- Replies: 2
- Views: 1982
Gearmatic winch on a 40c
I might have a chance to pick up a Gearmatic winch from a junked 420c. Is the power shaft and housing the same for the 420 and 40 or will I have to find one specifically for my 40?
- Sun Dec 04, 2022 8:22 am
- Forum: Early model JD crawler technical support
- Topic: Location information
- Replies: 17
- Views: 65857
Re: Location information
From the "Great White North" (Canada). Saint John, NB on the Bay of Fundy Coast where we eat seaweed (Dulse) and have the highest tides in the world.
- Thu Nov 24, 2022 9:46 am
- Forum: Early model JD crawler technical support
- Topic: 40c Ignition problems
- Replies: 8
- Views: 9695
Re: 40c Ignition problems
I tried to test the old condenser that wasn't working (previously sourced from JD) and the lead wire fell out. Didn't look burnt, just disconnected.
- Wed Nov 23, 2022 5:58 pm
- Forum: Early model JD crawler technical support
- Topic: 40c Ignition problems
- Replies: 8
- Views: 9695
Re: 40c Ignition problems
Just wanted to give a nod to Lavoy and a thanks for supplying quality ignition parts at a reasonable price. Picked up mine, points, condenser, rotor and dist. cap, from the shipping depot on the weekend. Quality parts made on this side of the pond, fit well and the machine started up, which it would...
- Tue Nov 01, 2022 6:10 am
- Forum: Early model JD crawler technical support
- Topic: 40c Ignition problems
- Replies: 8
- Views: 9695
Re: 40c Ignition problems
Thanks Lavoy. email sent
- Sat Oct 29, 2022 12:20 pm
- Forum: Early model JD crawler technical support
- Topic: 40c Ignition problems
- Replies: 8
- Views: 9695
40c Ignition problems
Is anyone else experiencing problems with condensers? Drove crawler out of the garage and parked it a couple of months ago. Now won't start. Power to distributor but no fire at the points. The coil is relatively new and I did replace points and condenser a few years ago with aftermarket parts now su...
- Tue Aug 30, 2022 1:25 pm
- Forum: Early model JD crawler technical support
- Topic: 40c Steering Clutches
- Replies: 4
- Views: 2846
Re: 40c Steering Clutches
Just an update on my progress with the stuck steering clutches. I took the final drive apart again and measured the thickness of the assembled pack and the individual discs. Lavoy was correct in suggesting that the fiber discs had swollen and their total thickness was not allowing the clutch to dise...
- Wed Aug 10, 2022 9:52 am
- Forum: Early model JD crawler technical support
- Topic: 40c Steering Clutches
- Replies: 4
- Views: 2846
Re: 40c Steering Clutches
Thanks Lavoy. I will check thickness when I get it apart.