JDcrawlers Messageboard

Sold

I have a nice 350 for sale asking 12,500.00 OBO. contact me for pics. and phone #

Thanks Kilohertz, Is that the original setup? I have pins so I can easily remove the blade to attach a rock rake. This looks like a much easier fix though. I will have to think on this one, it will save me alot of welding.

Thanks Gregjo1948, I went to look and passed on it. Looks like it needs some work down under.

I am going to look at a 430 crawler sunday, any advice on what to look for? Also would like to ask for a range of value if possible.
Thanks

Mine leaked in the same spot as soon as I bought it an drove it onto my trailer. It was the seal between the reverser and engine. Bad bearing on the input shaft took the seal out. $275.00 in parts including fluids and filter. 12 hrs. of your time.
Hope this helps Neil

Yeah, but it is a good excuse to go to camp for the weekend!

Thanks Stan, I understand what you are saying and I wish that was the case (it would be an easy fix), but the bolts are not yet touching the frame and the pin is. The only thing that makes sense to me is that when they repaired the blade they moved the tracks in to far. Now when I angle the blade th...

So I took a look at it again and it's definately the pin hitting the side of the frame, It looks like I will have to cut off and move the track rails out towards the ends of the blade to make it work. Looks like a fun afternoon with the portable welder and a cooler.

Thanks Stan, I will take a closer look, and you are correct when you say there's no such thing as a cheap crawler.

Ok Here are some pics, I measured the blade and it's 90 inches. It's hard to tell but in the one pic. you can see the pin is hitting the main fram and keeping it from going back. http://i759.photobucket.com/albums/xx236/lazylogger/012.jpg http://i759.photobucket.com/albums/xx236/lazylogger/011.jpg h...

Thanks guys, The dozer is up in the woods now but I will get some pics asap.

That's what I thought too. But nothing seems bent or worn more than normal. The only thing I can see is some repair work on the blade but they would have had to remove the same amount from both sides, because the pins are off equally either direction and not when they are centered(blade straight). I...

Hello everyone, I have been reading posts here for a while and it seeems like this is a great place to find info and learn about dozers. I have purchased my 1st dozer recently and so far like it. I see that there are experts here that can answer alot of questions about these. I am more into powerspo...