JDcrawlers Messageboard

Hi folks,
I have a question. Does a 350c reverse work different than the dry clutch models? I had the impression that it works with the steering clutches somehow.
Thanks for any info Sam

I'm in need of one front idler shaft and a set of bushings also bushings for 5 rollers does anyone have these for sale? They are for a 440 icd later seriel #

Does anyone know what ser.# of a 1010 would be considered early?

I looking for a fuel pump for my 440ICD. I changed the seals in mine but it still leaks. I put the seals in the direction the manual showed but it looked backwards to me. I increased the size of the relief hole to the seal it still poured fuel. I finally made up a copper return line from the pump se...

I sent (pm) the info let me know if you didnt get it.
sam

Thats wonderful I'm going to measure mine. I,m trying to fit it on a late production 440ICD. How for off could your measurement be you said about? AND What about the condition of the splines? Do you have any idea how much to get it to louisana? Everyone I talk to saids they might be the same as mine...

do you still have the early 1010 axle? If you do how long is it?
sam

I have one of the last 440ICDs made and the final drive is different than most. My axle part# is AT 16669 T. Is this the same axle that is in a 1010? My housing # is AT 17725 T is this the same as a 1010? If any body with a 1010 parts list knows thanks in advane. Sam p.s. any thing after ser#456802 ...

Surplus center did have some 9spline ccw 12 gpm cat A pumps.

hi, Your reverser may be slipping on worse stripping. I checked to see if my main clutch was slipping by pushing on something solid or use the brake with the inspection plug out of the reverer. Oil didn't go every where so i figured it was the clutch. Problem is if your reverer is slipping I don't k...

Thanks for the tips guys. I was not aware deere put power adders on this motor. I don't know a lot about 350 engines is there only one model on these dozers thought out the years? I agree a blower would be easyer to rig but I don't know where to find one the right size. I tihink I can get my hands o...

Can a 350 handle any boost? Just a thought I don't know much about the engines. I do wish mine had more power sometimes.
Sam.

Lavoy,
I need five new rollers for my 440. I plan to go to 350
rails in the future. Can I change rollers now and rails later?
I know I'll need to re-rim sprockets. How much are new rollers?

Do ya'll know the model # of a new pump that will fit a 440?

Does any one know of a parts source for a massey-ferguson200B? I read somewhere that they were made in germany. Does anyone know the name of the company?
sam