Search found 14 matches
- Sun Mar 30, 2014 8:36 am
- Forum: Show & Tell
- Topic: 350b wide track for sale in Ontario 12,000
- Replies: 5
- Views: 9730
Had a 350B yrs ago with 30" pads. Was just a 6way blade machine. Would practically walk on water. The pads on it were stating to fatigue like the picture so we added a Second grouser to each pad. Really stiffens them up, and flattened them back out. We would use it for maiming slope work placing top...
- Tue Mar 25, 2014 5:31 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
- Sun Mar 23, 2014 8:18 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
- Sun Mar 23, 2014 7:10 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
- Sun Mar 23, 2014 7:10 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
- Sun Mar 23, 2014 10:21 am
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
- Fri Mar 21, 2014 4:15 am
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
it rubs
Well I went through the carb last night, new points, coil hooked up a 6v battery I borrowed from dads 49 A and my 440 fired up. She just sat and purred. What goodfeeling it was. I'm hoping to test drive it today. I know there's things wrong but hoping to figure them out today. When I try to drive it.
- Wed Mar 19, 2014 6:42 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
Ok I've got a question, by looking at my crawler it has the pto lever on the left side on trans. It has the cap on the rear where pto would go. What do I need to have pto. Obviously the shaft and bearing housing that bolts it place of the cap. But can I literally slide it in and go? Know for the oth...
- Tue Mar 18, 2014 6:09 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
- Mon Mar 17, 2014 7:06 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
Thanks Paul! I'm not sure what I'm going to do for sure with my toy. Its more or less a connection between my childhood farmboy experices and my adult profession. It's a Combination of our 2cly tractors we have on farm and what I do everyday of the week working on and operating equipment. Next time ...
- Sun Mar 16, 2014 10:30 am
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
Thanks! I'll take a look to see if I can find that serial tag. And i agree about cost of building blade. Just checking if anybody has attempted it before and results.Hoping today to tinker abit on carb and clean gas tank and such. I really wish this rig had a 6way hydro blade but I can't complain fo...
- Sun Mar 16, 2014 5:53 am
- Forum: Late model JD crawler technical support
- Topic: JD555G TC
- Replies: 4
- Views: 6964
I have many hours on TC 550G LGP through my work over the years. Wonderfull dozer for finish grading! we have since upgraded to a CAT D5K LGP. We have a 455g loader TC on our family farm paired up with A 450G with direct drive. As far as just pushing dirt or clearing fences either one are great and ...
- Sun Mar 16, 2014 5:14 am
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
Well the loader is all off except the steel hydo line runnein under belly and up to each side going to drop belly pans today and remove them as well. I know I'm going to find issues with this rig the deeper I get. However the under carriage looks like it had major work done with few hours of run tim...
- Sat Mar 15, 2014 7:07 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC purchase
- Replies: 21
- Views: 15261
440IC purchase
Im a newbie who just hauled home and started tearing down a crawler. As I know it has the gas engine, 5speed trans, and reverser. It's equipped with the model 91 loader and 6ft blade but also getting the 5.5ft dirt bucket. The issue is I can't find the serial tag on the tractor. The loader tag is on...