Search found 51 matches
- Thu Nov 12, 2020 10:17 am
- Forum: Early model JD crawler technical support
- Topic: fuel additive
- Replies: 1
- Views: 1825
fuel additive
I have a 2010 diesel and have had problems in the past with injector pump gumming up. Can someone please advise as to a good additive to stop the problems with modern fuel gumming up the pump? The unit does not run for several months at a time but is always indoors. I have tried several but an not s...
- Tue Jun 20, 2017 10:40 am
- Forum: Early model JD crawler technical support
- Topic: 2010 loader leak
- Replies: 1
- Views: 2287
2010 loader leak
Does anyone have an aftermarket number for the seals in the tilt cylinder on this loader? Thanks much
- Mon Nov 21, 2016 1:08 pm
- Forum: Early model JD crawler technical support
- Topic: Jd2010 diesel won't stay running
- Replies: 14
- Views: 10255
I was to understand that the valve was to keep a certain pressure in the pump to help lube it--on my Farmall 706 the return line went into the bottom of the tank and perhaps it kept the extra weight of the fuel isolated from the pump. I just know it is a good test to see what you are dealing with. M...
- Mon Nov 21, 2016 8:50 am
- Forum: Early model JD crawler technical support
- Topic: Jd2010 diesel won't stay running
- Replies: 14
- Views: 10255
- Sat Nov 05, 2016 10:54 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 2010 generator for sale
- Replies: 0
- Views: 2902
2010 generator for sale
I have for sale used 12 volt generator from 2010 diesel loader.
It is Delco 1102331-3D17--12 volt--was working but I changed it for alternator two years ago. I want $65.oo plus shipping. Thanks
It is Delco 1102331-3D17--12 volt--was working but I changed it for alternator two years ago. I want $65.oo plus shipping. Thanks
- Tue Oct 18, 2016 7:18 pm
- Forum: Early model JD crawler technical support
- Topic: Just got a 1010 diesel, trying to get it going.
- Replies: 17
- Views: 14237
- Wed Sep 14, 2016 6:09 pm
- Forum: Late model JD crawler technical support
- Topic: Bucket teeth...one piece???
- Replies: 1
- Views: 2284
teeth
I could not find the proper teeth for my 2010--I just took some steel and made several to fit and then hard-surfaced them.
So far they work fine--did not put them on the corners of bucket.
So far they work fine--did not put them on the corners of bucket.
- Sun May 01, 2016 11:35 am
- Forum: Early model JD crawler technical support
- Topic: 1010 dozer with bad diesel motor
- Replies: 11
- Views: 9672
- Fri Nov 13, 2015 5:24 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 diesel crawler engine trouble
- Replies: 59
- Views: 44108
primer
Does your machine have a primer pump to aid starting? If it does you can use that to add extra fuel at any time and prove if lack of fuel is an issue. Just a thought.
- Wed Nov 11, 2015 12:24 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 diesel crawler engine trouble
- Replies: 59
- Views: 44108
Can you get any black smoke from your machine at all? If not it would seem the issue is fuel --not enough. Could be line restrictions or the governor not opening up in injector pump. Also many old posts about particles in Inj pump from internal breakup of plastic ring. It would seem to me if you cou...
- Mon Aug 17, 2015 7:18 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 trans trouble?
- Replies: 0
- Views: 2207
2010 trans trouble?
Sometimes my 2010 will seem to release when going down a long hill--it only seems to do this in the high range-(has HLR trans) When I get to the bottom it goes fine again..any thoughts? Trans gauge shows good pressure--if I can believe it. Seems to do it in 3rd gear high range only? thanks
- Mon Aug 17, 2015 7:13 pm
- Forum: Early model JD crawler technical support
- Topic: Final drive bearing race removal
- Replies: 9
- Views: 7741
bearing removal
You can run a hot bead around the inside with an arc welder and the bearing will fall out--no fuss no muss.
- Thu Jun 11, 2015 6:03 am
- Forum: Early model JD crawler technical support
- Topic: 1010 diesel compression question
- Replies: 4
- Views: 4612
- Wed Jun 10, 2015 11:17 am
- Forum: Early model JD crawler technical support
- Topic: 2010 bucket teeth
- Replies: 1
- Views: 2467
2010 bucket teeth
I am in need of two teeth for the high-lift bucket on my 2010--these are one piece teeth--I remember seeing someone say these are not available any more--has anyone found a two piece replacement for these? Or would someone have used ones for sale? Thanks
- Tue Jun 09, 2015 11:31 am
- Forum: Early model JD crawler technical support
- Topic: seat switch on 2010
- Replies: 4
- Views: 4470