Search found 28 matches

by cjman1977
Fri Feb 11, 2022 6:43 pm
Forum: Late model JD crawler technical support
Topic: JD 350B loader track pads
Replies: 2
Views: 2125

Re: JD 350B loader track pads

Thanks for that info. Greatly appreciate that.
by cjman1977
Sat Feb 05, 2022 4:49 pm
Forum: Late model JD crawler technical support
Topic: JD 350B loader track pads
Replies: 2
Views: 2125

JD 350B loader track pads

Anyone know what the height of the grousers are on a new triple grouser track pad on a 350B loader? Mine are pretty much even with the new bolt heads I used to put some of the pads back after replacing the rails. I'm thinking about welding grouser bars on the two outside grousers but not the middle ...
by cjman1977
Tue Apr 20, 2021 10:31 am
Forum: Late model JD crawler technical support
Topic: 350B loader Arm bushings, pins and lever arms rebuild
Replies: 4
Views: 3298

Re: 350B loader Arm bushings, pins and lever arms rebuild

I just checked with Deere, and the only parts available now are the bushings and washers. most have been obsoleted. Looks like I will have to fabricate these parts.

Thanks for the Info!
I love this site and all the kind people that are on it.

Bennett
by cjman1977
Mon Apr 19, 2021 5:51 am
Forum: Late model JD crawler technical support
Topic: 350B loader Arm bushings, pins and lever arms rebuild
Replies: 4
Views: 3298

350B loader Arm bushings, pins and lever arms rebuild

Is there a source for new or aftermarket parts to rebuild the pivot points, pins and lever arms for a 350B loader arms? Dealership parts still available?

Bennett
by cjman1977
Fri Apr 26, 2019 2:25 pm
Forum: Late model JD crawler technical support
Topic: Oil cooler leak on 350B
Replies: 1
Views: 3079

Oil cooler leak on 350B

The oil cooler is leaking between the cooler and the block. Is there a special gasket or is it just an O ring that seals it? In the parts manual it calls it packing. Just trying to get some info or some parts BEFORE I take it apart. Anyone got experience in this matter?

Thanks
Bennett
by cjman1977
Sun Apr 14, 2019 3:47 pm
Forum: Late model JD crawler technical support
Topic: Hydraulic ripper swap on 450b to 350b
Replies: 2
Views: 3658

Re: Hydraulic ripper swap on 450b to 350b

Thanks! I didn't even think of doing that.
by cjman1977
Sat Apr 13, 2019 6:54 am
Forum: Late model JD crawler technical support
Topic: Hydraulic ripper swap on 450b to 350b
Replies: 2
Views: 3658

Hydraulic ripper swap on 450b to 350b

Does any one know if the hydraulic ripper from a 450B will fit on a 350B Loader? I have the rear brackets for the backhoe on my 350B. I have the auxillary valve and diverter to switch from 4 in 1 bucket to the ripper.
by cjman1977
Mon Apr 06, 2015 1:37 pm
Forum: Late model JD crawler technical support
Topic: 350b top rollers
Replies: 4
Views: 4363

top roller

You are exactly right. I have been working on this thing for three months. Only supposed to replace the steering clutches. Turned into a complete undercarriage rebuild.

Bennett
by cjman1977
Wed Apr 01, 2015 5:14 pm
Forum: Late model JD crawler technical support
Topic: 350b top rollers
Replies: 4
Views: 4363

350b top roller

Thanks Lavoy.

Well what about the new front idlers. Should I use grease since it has a grease week?

Bennett
by cjman1977
Wed Apr 01, 2015 9:21 am
Forum: Late model JD crawler technical support
Topic: 350b top rollers
Replies: 4
Views: 4363

350b top rollers

Just bought new top rollers for the 350b. Old ones were lubricated with grease. Should I do the same for the new ones? It has the same leather seal with the springs behind it. This looks like a grease seal rather than an oil seal. On another note, This thing is going to nickle and dime me to death. ...
by cjman1977
Wed Feb 11, 2015 9:22 am
Forum: Late model JD crawler technical support
Topic: 350B brake drum
Replies: 3
Views: 3684

350b brake drum

Lavoy,

I measured the depth of wear and it is .035 of wear. Is that to much ?

Bennett
by cjman1977
Sat Jan 24, 2015 2:18 pm
Forum: Late model JD crawler technical support
Topic: Steering clutch instalation problems
Replies: 3
Views: 3656

steering clutch

Thanks Lavoy

Bennett
by cjman1977
Fri Jan 23, 2015 7:38 am
Forum: Late model JD crawler technical support
Topic: Steering clutch instalation problems
Replies: 3
Views: 3656

Steering clutch instalation problems

I have a new set of fiber clutches and metal discs, along with new clutch. When I adjust the clutch fingers using the tool, I remove the little spring clip from the adjuster bolt and proceed to adjust according to the tech manual. But once adjusted there is not enough room between the bolt head and ...
by cjman1977
Sat Jan 17, 2015 3:04 pm
Forum: Late model JD crawler technical support
Topic: Wear Strip on 350B Front Idler track frame
Replies: 1
Views: 3208

Wear Strip on 350B Front Idler track frame

Does anyone know the dimensions of the WELD ON wear strip on the under side of the C channel track frame where the front idler slides? Also, is it AR plate or a medium to high carbon steel?
Mine is so thin it only has one side. :lol:

Bennett