Search found 28 matches
- Fri Feb 11, 2022 6:43 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350B loader track pads
- Replies: 2
- Views: 2155
Re: JD 350B loader track pads
Thanks for that info. Greatly appreciate that.
- Sat Feb 05, 2022 4:49 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350B loader track pads
- Replies: 2
- Views: 2155
JD 350B loader track pads
Anyone know what the height of the grousers are on a new triple grouser track pad on a 350B loader? Mine are pretty much even with the new bolt heads I used to put some of the pads back after replacing the rails. I'm thinking about welding grouser bars on the two outside grousers but not the middle ...
- Tue Apr 20, 2021 10:31 am
- Forum: Late model JD crawler technical support
- Topic: 350B loader Arm bushings, pins and lever arms rebuild
- Replies: 4
- Views: 3334
Re: 350B loader Arm bushings, pins and lever arms rebuild
I just checked with Deere, and the only parts available now are the bushings and washers. most have been obsoleted. Looks like I will have to fabricate these parts.
Thanks for the Info!
I love this site and all the kind people that are on it.
Bennett
Thanks for the Info!
I love this site and all the kind people that are on it.
Bennett
- Mon Apr 19, 2021 5:51 am
- Forum: Late model JD crawler technical support
- Topic: 350B loader Arm bushings, pins and lever arms rebuild
- Replies: 4
- Views: 3334
350B loader Arm bushings, pins and lever arms rebuild
Is there a source for new or aftermarket parts to rebuild the pivot points, pins and lever arms for a 350B loader arms? Dealership parts still available?
Bennett
Bennett
- Fri Apr 26, 2019 2:25 pm
- Forum: Late model JD crawler technical support
- Topic: Oil cooler leak on 350B
- Replies: 1
- Views: 3102
Oil cooler leak on 350B
The oil cooler is leaking between the cooler and the block. Is there a special gasket or is it just an O ring that seals it? In the parts manual it calls it packing. Just trying to get some info or some parts BEFORE I take it apart. Anyone got experience in this matter?
Thanks
Bennett
Thanks
Bennett
- Sun Apr 14, 2019 3:47 pm
- Forum: Late model JD crawler technical support
- Topic: Hydraulic ripper swap on 450b to 350b
- Replies: 2
- Views: 3732
Re: Hydraulic ripper swap on 450b to 350b
Thanks! I didn't even think of doing that.
- Sat Apr 13, 2019 6:54 am
- Forum: Late model JD crawler technical support
- Topic: Hydraulic ripper swap on 450b to 350b
- Replies: 2
- Views: 3732
Hydraulic ripper swap on 450b to 350b
Does any one know if the hydraulic ripper from a 450B will fit on a 350B Loader? I have the rear brackets for the backhoe on my 350B. I have the auxillary valve and diverter to switch from 4 in 1 bucket to the ripper.
- Mon Apr 06, 2015 1:37 pm
- Forum: Late model JD crawler technical support
- Topic: 350b top rollers
- Replies: 4
- Views: 4399
top roller
You are exactly right. I have been working on this thing for three months. Only supposed to replace the steering clutches. Turned into a complete undercarriage rebuild.
Bennett
Bennett
- Wed Apr 01, 2015 5:14 pm
- Forum: Late model JD crawler technical support
- Topic: 350b top rollers
- Replies: 4
- Views: 4399
350b top roller
Thanks Lavoy.
Well what about the new front idlers. Should I use grease since it has a grease week?
Bennett
Well what about the new front idlers. Should I use grease since it has a grease week?
Bennett
- Wed Apr 01, 2015 9:21 am
- Forum: Late model JD crawler technical support
- Topic: 350b top rollers
- Replies: 4
- Views: 4399
350b top rollers
Just bought new top rollers for the 350b. Old ones were lubricated with grease. Should I do the same for the new ones? It has the same leather seal with the springs behind it. This looks like a grease seal rather than an oil seal. On another note, This thing is going to nickle and dime me to death. ...
- Wed Feb 11, 2015 9:22 am
- Forum: Late model JD crawler technical support
- Topic: 350B brake drum
- Replies: 3
- Views: 3704
350b brake drum
Lavoy,
I measured the depth of wear and it is .035 of wear. Is that to much ?
Bennett
I measured the depth of wear and it is .035 of wear. Is that to much ?
Bennett
- Sat Jan 24, 2015 2:18 pm
- Forum: Late model JD crawler technical support
- Topic: Steering clutch instalation problems
- Replies: 3
- Views: 3688
steering clutch
Thanks Lavoy
Bennett
Bennett
- Fri Jan 23, 2015 10:09 am
- Forum: Late model JD crawler technical support
- Topic: Steering clutch instalation problems
- Replies: 3
- Views: 3688
Steering clutch instalation problems
Here is an image.
- Fri Jan 23, 2015 7:38 am
- Forum: Late model JD crawler technical support
- Topic: Steering clutch instalation problems
- Replies: 3
- Views: 3688
Steering clutch instalation problems
I have a new set of fiber clutches and metal discs, along with new clutch. When I adjust the clutch fingers using the tool, I remove the little spring clip from the adjuster bolt and proceed to adjust according to the tech manual. But once adjusted there is not enough room between the bolt head and ...
- Sat Jan 17, 2015 3:04 pm
- Forum: Late model JD crawler technical support
- Topic: Wear Strip on 350B Front Idler track frame
- Replies: 1
- Views: 3224
Wear Strip on 350B Front Idler track frame
Does anyone know the dimensions of the WELD ON wear strip on the under side of the C channel track frame where the front idler slides? Also, is it AR plate or a medium to high carbon steel?
Mine is so thin it only has one side.
Bennett
Mine is so thin it only has one side.
Bennett