JDcrawlers Messageboard

SOLVED So, We found out that this is a straight 350 not a 350c. That helped the John Deere local parts fella help a friend of ours locate the real parts #'s for the 350. Using GENUINE John Deere parts resulted in finding fuel filters with holes on the top- which is what everyone on on here - and wh...

To address fuel flow direction: I have a 2030 wheel tractor with the single filter of that Roosa-master type housing. I checked and it has the same part numbers for the center bolt (screw), filter, bowl and small parts, just a single head. I just changed the fuel filter to check the flow through it...

You say that you are cranking the motor over, doesn't your lift pump have a lever on it so you can hand pump the lift pump. Your next problem is going to be a starter at this rate. That's so accurate. We were trouble shooting what you noted about the lifter pump. It shoots diesel under mechanical p...

Hi, Bleeders are on top of the housing, one for each filter. Good point about loosening the fuel cap. And having the tank full. Helps bleeding even when all is A-OK. As far as the gaskets go, whichever fits right. It has to seal the filter and not block anything. Kind of hard to say anything more w...

Hi, Bleeders are on top of the housing, one for each filter. Good point about loosening the fuel cap. And having the tank full. Helps bleeding even when all is A-OK. As far as the gaskets go, whichever fits right. It has to seal the filter and not block anything. Kind of hard to say anything more w...

Hi, The fuel is obviously blocked. My first thought was the same: old gasket didn't come out and now there are two. One is probably blocking the inlet port of the number two filter. Fuel passes from the outside to the inside and the passage is part of the filter housing and pretty close to the gask...

My father had an International 500c dozer and the fuel system on that thing was a bear to bleed. First time I changed the filters I tried everything and still couldn't get fuel past the filters. Someone on the International forum suggested popping off the fuel filler cap, and putting a couple of ps...

Hi, The fuel is obviously blocked. My first thought was the same: old gasket didn't come out and now there are two. One is probably blocking the inlet port of the number two filter. Fuel passes from the outside to the inside and the passage is part of the filter housing and pretty close to the gask...

Did you change the seal in the filter housing? I helped a cousin of mine who had this problem on a Ford tractor. He put the new seal on top of the filter without removing the old seal from the groove causing the new seal to go down into the top of the filter blocking the flow of fuel. We removed th...

http://www.composurephoto.com/johndeere/img_1012.jpg http://www.composurephoto.com/johndeere_withtext_fuelfilter.jpg Running 1976 John Deere JD 350C. Changed Fuel Filters - fuel came out of the bleed screw. But I forgot to turn the petcock back on, so ran for about a Minute (?) and died. Opened the ...

Hello, My husband and I have a 350 76ish 350 crawler up and running. It has a rake in the back on 2-pt system and bucket in front. All works well. Can I put an accessory of some sort that turns a rake and the pto system into an auger or post hole digger. I haven't figured out how to post pics yet. B...

Here is what our 350 looks like. I think it's a 76 because at the top of the cab is a mfg date of 03-22-76 listing gwv at 18k. I'm having trouble reading the serial # under the seat where you feet rest. It's pretty painted over. http://www.composurephoto.com/tractor_james/IMG_1928.JPG Here is a far ...

We just moved to this property and the mechanic was able to get the 350 running with a new starter, battery and spider web patrol. So, it has a bucket and ripper and back and a hole that the mechanic said was for PTO accessories. I'll try to get some photos to upload. Can anyone tell me based on fin...

Hello, we are in central California foothills and we have 1976 jd350 crawler and we are looking for the backhoe attachment. The bucket works and there are rippers at the back. Mechanic said we are currently not using the PTO which is covered at the back of he machine.

Thank you![/img]