JDcrawlers Messageboard

Any time you want Norb.............here is a few more pics, including the new flywheel, isolator and pilot bearing. Couple pics of misc. things that are being re-sealed, reverser is going to have the end play on the shafts checked and adj. to spec. how can I make the pictures bigger???? these small ...

Pre tear down.....https://scontent-b-lga.xx.fbcdn.net/hph ... 3604_o.jpg

Heck Norb, I ride atv and sleds up your way all the time, I'm in the Camden area. when I am done this dozer will be as mechanically sound and complete as any you can find. I am using the parts manual and putting every nut, bolt, washer and component back to its' original state....even the "boot" ove...

Hmmm, sorry, not seeing it Lavoy. I checked the "Edit" portion also??

Thanks mark, Flywheel was 680.00 shipped...machinery trader had a company listing one...forget who it was from and the slip is down at the shop, Lavoy came up with the rubber isolator and my brother in law is making the center hub.

O.k. as many on here know I am converting my "C" isolator into a "D" series isolator to get rid of the rattle and potential reliability issues associated with the spring style. I have the flywheel, rubber isolator, rivets, and the center hub is done all but the splines that a machine shop is making ...

......got it figured out I think.....don't see how to delete this post though.

Looks to be the same on DEERE PARTS as the "C"------Pondhogvt, wish your post came sooner got one last Wednesday from DEERE at the tune of 1395.00 delivered...500 would have been great!!

o.k. ---still need help..................

could I get a step buy step please, trying to post some good pics for us crawler guys..........sorry, just read the FAQ section(should have done that first) am used to pulling off an sd card from my camera.

HYGUARD....approx. 90.00 for five gallons. not the low viscosity.

Looking for the clearance for the reverser pump...mine is at .010, read the tech. manual and that spec. is not listed, all it says is to check for damage and replace as necessary. Don't wanna replace it if it's fine. Reverser seems to operate great, I can load it to a stall in 1st gear with no evide...