Search found 3 matches
- Tue Sep 16, 2014 8:44 pm
- Forum: Early model JD crawler technical support
- Topic: Quill removal
- Replies: 6
- Views: 5775
Success!!!! Lavoy, I used your method, using a brass punch and hammer I was able to rotate the quill. Then I tapped two holes and tightened in a couple bolts. It didn't want to come out evenly though. It was hung up a little in one spot so I tapped another hole and then with a little bolt pressure i...
- Tue Sep 16, 2014 12:32 pm
- Forum: Early model JD crawler technical support
- Topic: Quill removal
- Replies: 6
- Views: 5775
- Mon Sep 15, 2014 6:18 pm
- Forum: Early model JD crawler technical support
- Topic: Quill removal
- Replies: 6
- Views: 5775
Quill removal
Hello, I'm new to this site but I'm wondering if I can get a little assistance. I'm working on a 420 crawler with a bad steering clutch. While I've got the clutch out I want to replace the seal behind the quill as the clutch housing was obviously oily. Not sure if it was the final drive seal or the ...