JDcrawlers Messageboard

ok thanks Larry

What does a john deere 350 with a six way blade Weight? thank Larry

Thanks for all the help everybody. Got it apart now just to clean it up and order the seals.

Still working on the track adjuster got it out 2 or so inches. But now the grease just comes out around the pipe so going to try to find a press and work on it some more. First I think I got it all the way in then with grease got it back out 2 inches. Can get it to turn with a 4 foot pipe wrench and...

Hi I have a John Deere 350 dozer . The track adjuster is stuck have it off and have put wd40 in it for two days and then put in a small press and it did move some. Is it ok to put heat on this or just have buy a new one? Has anyone ever had one apart and what's inside? I don't have a torch but could...

op" wrote:i'll sell you the whole pump

what do you have and how much. and does it work. Thanks Larry

Thanks guys found some grease at a deere place 120 mile from homes but have to go by there in two weeks so it will work out fine. 3.71 a tube

Hi guys need to find out where a person as in me, where can I buy the end for my grease gun to grease the button fitting on my 350 crawler . And where can a person get the grease? Checked one auto parts and they never heard of corn head grease, but they did have a big block to fit on the gun but was...

Thanks everybody got five gallons of 303 today. Larry

What is the oil you use in final drive of a 350 dozer? The book said john deere 303 special purpose oil but what is this? Thanks for the help. Larry

Just a comment, adding a disk to take up space for worn disks, is not the answer for slipping steering clutches due to wear. From experience, i won't go to all the work to pull a final without replacing disk with new ones. Nope going to get all new getting old and lazy don't want to do it twice. La...

Is the rod bent, or just sticky? Lavoy Got it out was just stuck finely got it out the bottom bushing and all. So now I also need a soft plug but should be able to find that around here. Might need a new spring for throw out but I see you have them, the one I have has a hook on one end but not the ...

You are not going to like my answer, but if in doubt, throw them in the garbage and put in new ones, then you know for sure. I don't like pulling finals, so if I have one off, it gets discs and pressure plate. I had a customer that pulled a final drive 4 times because he thought the old discs were ...

Have my final off a 350 dozer and don't know if the clutches are bad or not. Not sure how thick they should mic to? I don.t think they are fiber if they are all is wore off but I think they are bi metallic As I had no power to the left track but now I think it has to do with the rod that works the t...

Thanks for the help so far. I now have the final drive off my 350 and need to know how to check the disc for the steering clutches ? I have taken off the pressure plate but don't know the specs for the plates. And what should they look like the ones I have a center and about 1/16 on each side and lo...