JDcrawlers Messageboard

thanks jim i will try that.

john deere 350 loader hydraulic boom cylinder, how to remove from machine for repair what is needed to pull back pin?

thanks jim i have the top lose but the filter will not come up, it is lake it is stuck?

having a time getting hydraulic filter out of jd350 loader tank took bolts out but housing will not come up, have pull and pull but will not budge. any ideas i do not understand why it will not come up?

john deere ripper for sale #3100 email, bandbfarms@hotmail.com

thanks for all the help in rebuilding my 1967 straight 350 loader. this form and mr lavoy were so much help with the best parts and advice on my bebuild. thanks to all butch from alabama

it was the pinion shaft seal,who ever install it before used a hammer. the bearing look good, is it ok to change them without changing the races. thanks for advice do you sell the kit to rebuild the steering and what be shipping to alabama.

1967 350 loader,have final drives off to rebuild steering found oil on one side where did it come from and how do i fix it? do not know history of tractor before me , oil in final drive looks to be ok and looks to be 90w. most of the oil is on the break band . the outher side is just old and rusty a...

thanks for the reply, have pulled and pryed with crow bar and the cover will not come off.

took bolts out filter housing will move a little but will not come out, was not sure did not want to tear somethilng up.

how do i replace hydraulic filter in my 350 loader, filter is in tank?

after thinking it over red loctite would be better,because the last isolator installed in my machine spring broke. i bought this machine in september with a locked up motor for $2500, pulled motor out and pieces of springs fell out motor was not locked up.bought new isolator kit for $1300 , with mot...

i think i will use blue.

what type of loctite for isolator bolts blue or red.

thanks for the reply