JDcrawlers Messageboard

Back them on drive them off especially with a hoe.

On my 350 I changed the adjuster about 20 years ago.If my memory is correct I pulled the idler forward with a come a long attached to the loader bucket. this took all the slop out of the track. Then I cut out the old adjuster. With the new adjuster fully compressed I was able to get it in place with...

what works best for me. The toplink adjusted with about half the threads on both ends showing should extend out the length of the lift arms. On most implements the lift pins are directly below the pin for top link. With the toplink at this length you have adjustment in or out depending on the desire...

I was looking at the serial numbers on the 350 in 87 it looks like about 10000 were made in the years prior to that some years had less than 5000.

If that's world wide distribution no wonder they stopped making them.

are serial numbers consecutive world wide or do machines made and distributed in countries outside US have different listing.

If you look at the engine serial plate along side the starter I think you will find that your engine was made in France. The JD ag tractors are made in France. My 350c has a rotodiesel ip. that was the first clue something was wrong. Then I figured out the bolts were metric. That is when I looked at...

someone may be interested in this machine.

hudsonvalley.craigslist.org/hvo/5932458394.html

way back when I was young and dumb I had a cat model 22 with a crank. What I would do is put it in gear on flat ground push it with the tractor untill it started. shut down the tractor run up and climb on the cat from behind. Now that I'm old and dumb I can't run fast enough to catch a cat so I had ...

Thanks for the reply It is on hold for now Too many other things going on.


Ed

Yes it has a solenoid that is getting 12 volts. when I put power to it I can hear the shut off click.

Ed

Thanks for the response Leonard there seems to be fuel getting to the pump

just not getting to the injectors.

I have to put it on the back burner for now too many other projects to work on with higher priority.

Ed

While doing some work with the 350c the engine shut down. I checked the fuel solenoid thats good has a good fuel flow coming from the tank. I pulled the fuel line going into the ip good flow while cranking but did not check with pressure gauge. I cracked the lines at the injectors no fuel while cran...

Stan If the alternator stops working with out a battery,How would a car run without a battery. On more than one occasion I have used a battery to start a car than removed the battery . One time i drove 3 miles to an autoparts store with out a battery. that vehicle was a 95 VW definitely an alternato...

The splined coupling has to come off . That coupling should move freely on the shaft.The spring keeps the coupling in place with light pressure.
You will have to use some type of puller to get the coupling off. than clean it
It should slide on both shafts freely.

on the 350 straight that splined coupling has a lever attached to it . when working properly the coupling can be move forward allowing one to change the belt without removing the hydraulic pump. I would make sure it is working properly before reassembly it is a nice feature that was done away with o...