JDcrawlers Messageboard

Ok so I change the reverser filter and oil today. Problem is still there. With the gear box in neutral and rpm around 1500. I shift the reverser into reverse and the engine will load up and will stall unless I step on the clutch. If I shift the reverser forward, it will not load up and actually I ca...

OK Thanks! Im gonna give it a try this weekend. Another thing I forgot to mention. When I got it started last weekend, After sitting for years, i drove it out of my garage fine. Went into gear no problem. As I was running it in front of my garage, it acted up and the problem happened. Couldnt get it...

Don't worry about the drain plug. When you remove the filter EVERYTHING will flow out. It is held in by the four evenly spaced (in a square) bolts on the right side of the reverser. By all means change the fluid and filter. You can mop out any crud by sticking your hand through the filter hole (aft...

I checked the reverser oil and it looked ok. I do want to change it with the filter but Im noe sure how to do this. Where is the drain plug and filter? Also if the fluid is good, do I check the pressure? If the pressure is low, what does this tell me?

I have a 1971 JD350B that hasn't been started in years. I got it started by replacing the injection pump. It starts up fine now and I pulled it out of my garage. It took it for a drive and the steering didn't seem to good. Very hard to steer left. While I was stopped and had it idling , it started t...

I need some help and not sure what to do. I have an early JD 350B dozer that hasn't ran in a while. I tried to get it started but its been sitting with diesel in it and it seems the fuel clogged everything. I put new filter and a brand new injection pump. I have fuel going to the injectors but nothi...

I think I screwed up! I'll start from the beginning. I have a '71 JD 350B dozer that I have started in 3+ years. When I put it in the garage, I ran fine but had a hydrolic leak so I haven't used it. I couldn't get it started and we determined that the injector pump was varnished from fuel sitting in...

I have an older JD350 dozer that I havent started in a a few years. Today I wanted to try and start it so I put new batteries in it and fill diesel. It cranks but wouldnt start. We pumped the fuel pump and bled out any air we can. We got fuel up to the injector pump going in but nothing coming out t...