Search found 58 matches
- Wed Oct 20, 2021 4:52 pm
- Forum: Early model JD crawler technical support
- Topic: need help with my 40 steering
- Replies: 1
- Views: 2236
need help with my 40 steering
so i got this 40, everything was working great until one day, the left hand side was not turning anymore, i already installed a new set of clutch and pusher plate about a year ago. decided to replace the clutch and the pusher plate with some good one for testing. crawler work for about 10 minute and...
- Tue May 16, 2017 4:54 pm
- Forum: Early model JD crawler technical support
- Topic: 420c undercarriage rollers
- Replies: 2
- Views: 3410
420c undercarriage rollers
is there a way to split those roller so i can change the bearing in it without damaging the parts. i tried a broken one, got it but at the end, my shaft was gone.notice there is a bearing and seal on each side. thank you
- Wed Jun 15, 2016 2:34 am
- Forum: Early model JD crawler technical support
- Topic: model 40 alternator problem
- Replies: 14
- Views: 9134
you are right, it's for my Deere but it think with the same components and since its had an alternator on it when i got it, probably the people before didn't wired it properly. so with all the info and some guidance here and there, i should be able to removed everything and start over. I'm hoping an...
- Tue Jun 14, 2016 3:59 pm
- Forum: Early model JD crawler technical support
- Topic: model 40 alternator problem
- Replies: 14
- Views: 9134
i found a wiring diagram for a ford 8N with 12 volt conversion. got some point, coil, terminal block, voltmeter, key switch, starter button, starter and a battery in the schematic. i'm pretty sure it would work since it got the same component i got. still will make a schematic with Stan info and com...
- Tue Jun 14, 2016 9:05 am
- Forum: Early model JD crawler technical support
- Topic: model 40 alternator problem
- Replies: 14
- Views: 9134
- Tue Jun 14, 2016 2:53 am
- Forum: Early model JD crawler technical support
- Topic: model 40 alternator problem
- Replies: 14
- Views: 9134
- Mon Jun 13, 2016 4:25 pm
- Forum: Early model JD crawler technical support
- Topic: model 40 alternator problem
- Replies: 14
- Views: 9134
ok, so yep, regulator was into the alternator and damage. so the person fix it and also for some reason decided to modified the alternator with just 1 wire. so my dad installed it and it doesn't make sense with the gauges operation. is there some one that could tell me how to wire my bulldozer prope...
- Sat Jun 04, 2016 12:55 pm
- Forum: Early model JD crawler technical support
- Topic: model 40 alternator problem
- Replies: 14
- Views: 9134
model 40 alternator problem
my 12 volts alternator failed so I got a new delco 85amp. my problem right now is that my volt gauge is pegging and notice my battery becoming really hot that I can hear it leaking, was lucky it didn`t blow up. would someone have any idea what going on. I think it related to a voltage regulator, but...
- Fri May 20, 2016 1:18 pm
- Forum: Early model JD crawler technical support
- Topic: 420c help
- Replies: 6
- Views: 6163
- Fri May 20, 2016 1:17 pm
- Forum: Early model JD crawler technical support
- Topic: 420c help
- Replies: 6
- Views: 6163
- Fri May 06, 2016 2:40 pm
- Forum: Early model JD crawler technical support
- Topic: 420c help
- Replies: 6
- Views: 6163
420c help
need to replace my pressure plate, clutch and throw-out bearing. was looking at my parts book, but got more then 1 options. i got AM227T (c) and AM2676T (h,i,s,t,u,v,w) for pressure plate then got AM3791T(c) and (AM2575T(h,i,s,t,u,v,w) and finally, got M3549T and M4374T for carrier. how can i found ...
- Sat Apr 23, 2016 2:24 pm
- Forum: Early model JD crawler technical support
- Topic: 40c question
- Replies: 9
- Views: 7704
- Sat Apr 23, 2016 8:34 am
- Forum: Early model JD crawler technical support
- Topic: 40c question
- Replies: 9
- Views: 7704
- Sat Apr 23, 2016 4:17 am
- Forum: Early model JD crawler technical support
- Topic: 40c question
- Replies: 9
- Views: 7704
40c question
just put a new alternator, would like to check if it charging. if i do it like old car by removing the positive on the battery, should my engine keep turning? cause right now, when i remove the positive, my engine shut down. thanks
- Tue Mar 22, 2016 3:42 pm
- Forum: Early model JD crawler technical support
- Topic: 420 engines
- Replies: 5
- Views: 4941
420 engines
hey guys, me again :D , is there a reason why i got 2 420 crawler engine, one is green and the other yellow, oil dip stick is different and piston in the yellow is a little bigger, also by comparing both piston, one look like its was made stronger, thickness of the piston is bigger on the yellow one...