JDcrawlers Messageboard

well gentleman up and running found out after 12 years of sitting things did not move like they used too even us .so the clutch disconnect lever was not working right so after i got it working like a cats meow .started it up and sure enough she is alive .working know on gauges .thanks for all your i...

here is how you post pics http://www.jdcrawlers.com/messageboard/viewtopic.php?t=3690&highlight=photobucket ...... only one shaft/spline on crawler with HLR does anything work/move? ....HLR uses a different pressure plate .. did you set the finger height? do you have any free play in the floor leve...

so i got a donor motor for my crawler from a 2010 row crop 3 wheel tractor when i pulled the motor from wheel tractor i noticed the clutch and pressure plate was different .So the wheel tractor had a extra spline on the clutch it seems to run the PTO on the wheel tractor . so when i pulled the crawl...

IF you are talking about the cooler lines up front? having NO fluid then pull the right floor plate and look to see if the lines have been plugged off OR bypassed (near the filter) because one of the STEEL lines to the cooler rusted through ...I have had one of those lines rust through (from the OU...

Possible plugged filter or inlet screen? Lavoy thank you for reply i have check all filters changed fluid twice .would you know what drives the fluid and where would the pump be .

not getting any fluid out of transmission lines dont know why anyone please help