Search found 32 matches

by Jaybird
Mon Dec 19, 2022 9:14 pm
Forum: Early model JD crawler technical support
Topic: Log arch/
Replies: 3
Views: 1655

Re: Log arch/

Does the whole housing from the 440 fit the 430 wheel tractor? How will this effect the clutch? Or will it?
by Jaybird
Sun Dec 18, 2022 6:34 pm
Forum: Early model JD crawler technical support
Topic: Log arch/
Replies: 3
Views: 1655

Log arch/

Does anyone know if a log arch off a 350 or a 1010 will fit a 440 ? I would also like to know if a reverser from an early model 440 will fit on my 1960 430 wheel tractor? Thanks in advance
by Jaybird
Sun Jun 13, 2021 4:20 am
Forum: Early model JD crawler technical support
Topic: Looking for log arch - 1010
Replies: 4
Views: 5407

Re: Looking for log arch - 1010

I might be interested. What's your location? Price?
by Jaybird
Thu Feb 11, 2021 11:26 am
Forum: Early model JD crawler technical support
Topic: 440 icd
Replies: 6
Views: 4738

Re: 440 icd

Thank you Jim. This does help. If anyone has a full schematic of the wiring please let me know.
Thanks
by Jaybird
Wed Feb 10, 2021 7:50 pm
Forum: Early model JD crawler technical support
Topic: 440 icd
Replies: 6
Views: 4738

Re: 440 icd

Does anybody have a schematic of the wiring on a 44icd? I have one for a 440 ic but not the diesel
Thanks, Jaybird
by Jaybird
Thu Jan 21, 2021 6:38 pm
Forum: Early model JD crawler technical support
Topic: 440 icd
Replies: 6
Views: 4738

440 icd

I have a 440icd ( w/ 8A winch) that is great. I've slowly been working on it as time permits. I'm starting the dreaded electrical. I'm in need of a starter solenoid , regulator , pushbutton starter( one that last) , switch, possibly a wire harness. Lavoy , is this something you carry? Thanks, Jason
by Jaybird
Fri May 01, 2020 6:14 pm
Forum: Early model JD crawler technical support
Topic: Detroit diesel
Replies: 2
Views: 3141

Detroit diesel

I'm out running the old 440 today. Running good for couple hours then the motor started to " flutter" then cleared up. 10-20 minutes later started to "flutter" and almost stalled then smoothed out again. What is this? Poor fuel flow? Something internal? It kind of sounded like it was only running on...
by Jaybird
Sat Oct 12, 2019 4:58 am
Forum: Early model JD crawler technical support
Topic: Oil on brake band and clutch disks
Replies: 4
Views: 4263

Re: Oil on brake band and clutch disks

I just rebuilt an 8-a winch. I relined the brake band and clutch pads for $320. Call Asheville clutch and brake in N.C. should be good to go as long as your bands are in good shape
by Jaybird
Mon Aug 26, 2019 7:46 pm
Forum: Early model JD crawler technical support
Topic: Gearmatic 8a
Replies: 4
Views: 3816

Re: Gearmatic 8a

Thanks notmeu,
Working on getting break band spring tensioner adjuster out of the bottom. Any advise on removal? Also if you have the numbers for the bearings that you used that would be helpful
Many Thanks
by Jaybird
Sat Aug 24, 2019 7:15 pm
Forum: Early model JD crawler technical support
Topic: Gearmatic 8a
Replies: 4
Views: 3816

Gearmatic 8a

Hey all,
It's been a while since I've been on. I am working on getting this 8A winch going. Anybody have any idea where I can find controller parts? Also need new bearings. Does anyone have pics of a rebuild and part numbers?
Thanks, Jason
by Jaybird
Wed Nov 25, 2015 11:32 am
Forum: Early model JD crawler technical support
Topic: JD 1010 diesel crawler engine trouble
Replies: 59
Views: 43718

I replaced fuel pump on excavator once and got it off one gear and it did run . just not properly. I took it off again and got it off one notch the other way. Got it right the third time. Started it up and ran great for about 30 seconds then stopped. I got mad and started jerking fuel lines off. Fou...
by Jaybird
Thu Nov 19, 2015 6:27 pm
Forum: Early model JD crawler technical support
Topic: 440 icd air/drain tube
Replies: 12
Views: 8768

Thanks to all.
I love this thing. I think my girls are feeling neglected from me working on this thing all the time. My wife says its my girlfriend.
. jaybird
by Jaybird
Mon Nov 16, 2015 8:03 pm
Forum: Early model JD crawler technical support
Topic: 440 icd air/drain tube
Replies: 12
Views: 8768

Hey Ben, I see your from steubenville .I was raised in Holmes county Ohio and still go up there often. Do you have any good sources for parts in your area? I need two track tentioning springs and a couple other things.
Many Thanks, Jaybird
by Jaybird
Mon Nov 16, 2015 12:31 pm
Forum: Early model JD crawler technical support
Topic: 440 icd air/drain tube
Replies: 12
Views: 8768

Ben, there does seem to be some oil blowing out. How much is normal? I think it has been plugged up for many years before I cleaned it out. I hope there is no harm done.
Many Thanks, Jaybird
by Jaybird
Sat Nov 14, 2015 6:55 pm
Forum: Early model JD crawler technical support
Topic: Nasty gas leak
Replies: 5
Views: 5253

I agree most likely tubing is cracked. I just got done working on my 440 fuel system. I thought the line was leaking but it was the pump seals. Rebuilt pump with new shaft and seals. Now all is good
Jaybird