Search found 32 matches
- Mon Dec 19, 2022 9:14 pm
- Forum: Early model JD crawler technical support
- Topic: Log arch/
- Replies: 3
- Views: 1752
Re: Log arch/
Does the whole housing from the 440 fit the 430 wheel tractor? How will this effect the clutch? Or will it?
- Sun Dec 18, 2022 6:34 pm
- Forum: Early model JD crawler technical support
- Topic: Log arch/
- Replies: 3
- Views: 1752
Log arch/
Does anyone know if a log arch off a 350 or a 1010 will fit a 440 ? I would also like to know if a reverser from an early model 440 will fit on my 1960 430 wheel tractor? Thanks in advance
- Sun Jun 13, 2021 4:20 am
- Forum: Early model JD crawler technical support
- Topic: Looking for log arch - 1010
- Replies: 4
- Views: 5503
Re: Looking for log arch - 1010
I might be interested. What's your location? Price?
- Thu Feb 11, 2021 11:26 am
- Forum: Early model JD crawler technical support
- Topic: 440 icd
- Replies: 6
- Views: 4850
Re: 440 icd
Thank you Jim. This does help. If anyone has a full schematic of the wiring please let me know.
Thanks
Thanks
- Wed Feb 10, 2021 7:50 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd
- Replies: 6
- Views: 4850
Re: 440 icd
Does anybody have a schematic of the wiring on a 44icd? I have one for a 440 ic but not the diesel
Thanks, Jaybird
Thanks, Jaybird
- Thu Jan 21, 2021 6:38 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd
- Replies: 6
- Views: 4850
440 icd
I have a 440icd ( w/ 8A winch) that is great. I've slowly been working on it as time permits. I'm starting the dreaded electrical. I'm in need of a starter solenoid , regulator , pushbutton starter( one that last) , switch, possibly a wire harness. Lavoy , is this something you carry? Thanks, Jason
- Fri May 01, 2020 6:14 pm
- Forum: Early model JD crawler technical support
- Topic: Detroit diesel
- Replies: 2
- Views: 3204
Detroit diesel
I'm out running the old 440 today. Running good for couple hours then the motor started to " flutter" then cleared up. 10-20 minutes later started to "flutter" and almost stalled then smoothed out again. What is this? Poor fuel flow? Something internal? It kind of sounded like it was only running on...
- Sat Oct 12, 2019 4:58 am
- Forum: Early model JD crawler technical support
- Topic: Oil on brake band and clutch disks
- Replies: 4
- Views: 4331
Re: Oil on brake band and clutch disks
I just rebuilt an 8-a winch. I relined the brake band and clutch pads for $320. Call Asheville clutch and brake in N.C. should be good to go as long as your bands are in good shape
- Mon Aug 26, 2019 7:46 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a
- Replies: 4
- Views: 3956
Re: Gearmatic 8a
Thanks notmeu,
Working on getting break band spring tensioner adjuster out of the bottom. Any advise on removal? Also if you have the numbers for the bearings that you used that would be helpful
Many Thanks
Working on getting break band spring tensioner adjuster out of the bottom. Any advise on removal? Also if you have the numbers for the bearings that you used that would be helpful
Many Thanks
- Sat Aug 24, 2019 7:15 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a
- Replies: 4
- Views: 3956
Gearmatic 8a
Hey all,
It's been a while since I've been on. I am working on getting this 8A winch going. Anybody have any idea where I can find controller parts? Also need new bearings. Does anyone have pics of a rebuild and part numbers?
Thanks, Jason
It's been a while since I've been on. I am working on getting this 8A winch going. Anybody have any idea where I can find controller parts? Also need new bearings. Does anyone have pics of a rebuild and part numbers?
Thanks, Jason
- Wed Nov 25, 2015 11:32 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 diesel crawler engine trouble
- Replies: 59
- Views: 44038
I replaced fuel pump on excavator once and got it off one gear and it did run . just not properly. I took it off again and got it off one notch the other way. Got it right the third time. Started it up and ran great for about 30 seconds then stopped. I got mad and started jerking fuel lines off. Fou...
- Thu Nov 19, 2015 6:27 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd air/drain tube
- Replies: 12
- Views: 8846
- Mon Nov 16, 2015 8:03 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd air/drain tube
- Replies: 12
- Views: 8846
- Mon Nov 16, 2015 12:31 pm
- Forum: Early model JD crawler technical support
- Topic: 440 icd air/drain tube
- Replies: 12
- Views: 8846
- Sat Nov 14, 2015 6:55 pm
- Forum: Early model JD crawler technical support
- Topic: Nasty gas leak
- Replies: 5
- Views: 5305