It used to have a hoe on it, but the hoe was stolen long before I bought it.
Is there a way I can verify that I have the pump, plumbing and hooks for it?
Search found 23 matches
- Tue Mar 22, 2016 9:09 pm
- Forum: Early model JD crawler technical support
- Topic: jd400 backhoe fit on a 440 icd?
- Replies: 3
- Views: 3714
- Tue Mar 22, 2016 3:22 pm
- Forum: Early model JD crawler technical support
- Topic: jd400 backhoe fit on a 440 icd?
- Replies: 3
- Views: 3714
jd400 backhoe fit on a 440 icd?
I'm still looking for a backhoe for my 440icd and I ran across a guy who has a jd400 and a parts tractor for $2,500. The 400 apparently has seal issues and the previous owner ran it for years despite that. When he was done used would just drain the water out from the oil plug... Last run a week ago,...
- Mon Nov 16, 2015 2:22 pm
- Forum: Early model JD crawler technical support
- Topic: Nasty gas leak
- Replies: 5
- Views: 5327
- Sat Nov 14, 2015 2:13 pm
- Forum: Early model JD crawler technical support
- Topic: Nasty gas leak
- Replies: 5
- Views: 5327
Nasty gas leak
Quick post, because i gotta go meet someone about a chain saw, but I have a nasty gas leak here. Its in the hose that goes in to the cyclinder (central in the picture) and its not just a slow drip, its pretty substantial especially when its running. Fasteners seem pretty tight, so much so that I exp...
- Thu Oct 15, 2015 11:38 am
- Forum: Early model JD crawler technical support
- Topic: bradco 88m2ga backhoe on a 440 icd? advice?
- Replies: 13
- Views: 10048
- Thu Oct 15, 2015 11:33 am
- Forum: Show & Tell
- Topic: My 1st Crawler - 440
- Replies: 42
- Views: 91601
we are very lucky to have a source like this forum.. and guys such as yourself .. Stan.. Lavoy and others who are obviously quite passionate.. and so knowledgable with these old machines... It sure makes a newbie like myself more comfortable tearing into one... knowing solving an issue "can" only b...
- Thu Oct 15, 2015 11:29 am
- Forum: Show & Tell
- Topic: 440 ICD restoration
- Replies: 64
- Views: 64198
No idea where you are but here's a 440 icd crawler in AZ with spare parts to boot.johndeere4402-53 wrote:Thanks I'd like to find a 440 diesel tractor next
http://showlow.craigslist.org/hvo/5250307598.html
- Tue Oct 13, 2015 10:52 am
- Forum: Early model JD crawler technical support
- Topic: bradco 88m2ga backhoe on a 440 icd? advice?
- Replies: 13
- Views: 10048
Thanks for the clarification Lavoy. mini kahuna thanks for the thoughts on the heavyness. I was thinking that might be an issue as well. Dug 3, 16" holes 2' down on Sunday with a dig bar and a shovel. I really wish I had a backhoe or an auger. By the end there I was seriously considering just firing...
- Tue Oct 13, 2015 10:46 am
- Forum: Show & Tell
- Topic: My 440 ICD
- Replies: 13
- Views: 13462
Thanks pop pop. I'll try and post a picture this weekend. The cover will probably be reasonably easy to bend back into shape, but in the picture just before the stump, you can see that the bracket / bolt holes on the front top of the tractor were snapped off. I assume the cover attaches there, but I...
- Mon Oct 12, 2015 5:28 pm
- Forum: Early model JD crawler technical support
- Topic: Steering brake making unusual noise
- Replies: 55
- Views: 49270
- Mon Oct 12, 2015 5:26 pm
- Forum: Show & Tell
- Topic: My 440 ICD
- Replies: 13
- Views: 13462
I actually have no idea what I'm going to do with all those clevises... or what he did with them; they came with the tractor pretty much as you see it. I think for now, I'll just let them hang off there like those guys who hang a sack off their hitch. You may have a truck with balls, but I got a tra...
- Sat Oct 10, 2015 11:30 am
- Forum: Early model JD crawler technical support
- Topic: Pinhole leak, can I jb weld it?
- Replies: 6
- Views: 8140
I think it is a return line, it only leaked when I wasn't using the loader. It wasn't jetting out too hard either so I'd say pretty low psi. After I wire brushed it off and degreased it, I can see where it had been welded before. Didn't look like a very good braising job. I used the quick stuff, did...
- Fri Oct 09, 2015 3:34 pm
- Forum: Early model JD crawler technical support
- Topic: Ummm random bolt I found on the ground after using my 440
- Replies: 3
- Views: 4003
Ummm random bolt I found on the ground after using my 440
Umm I found a random bolt on the ground after using my 440. Can someone please identify it and tell me where to put it back? Might need a new one, the upper threads look worn down, but the bottom ones look good. Looks like its about 11/16" shaft, 1 1/16" head, 1.5" length and about a 3/32" thread. h...
- Fri Oct 09, 2015 3:14 pm
- Forum: Early model JD crawler technical support
- Topic: cdv
- Replies: 10
- Views: 8264
- Fri Oct 09, 2015 1:41 pm
- Forum: Show & Tell
- Topic: My 440 ICD
- Replies: 13
- Views: 13462
Tractor was in a guys family since it was a new and a nephew was using it to build a break on the side of an AZ mountain (a hill if you're from a place with real mountains). He ended up having a tree come down over the top of it and bust it up pretty good. I have the hood but its bent all to hell. A...