Search found 2259 matches
- Thu Jan 25, 2007 8:12 am
- Forum: Early model JD crawler technical support
- Topic: 420 C Hi- Crop !!!!!!!!!!
- Replies: 11
- Views: 11405
- Tue Jan 23, 2007 7:24 am
- Forum: Off-topic discussions
- Topic: Skidding with a JD440IC
- Replies: 10
- Views: 13438
I skid oak, walnut, and hedge with my 2010 with no major problems. I have been using 3/8" hardened chain and the only issue is losing the cotter pin out of the chain clevis pins over time. I cut the logs to 10+' or 20+' lengths as needed; I concur that skidding a tree longer than that would be too d...
- Tue Jan 16, 2007 12:05 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 fuel system question
- Replies: 8
- Views: 7688
- Wed Jan 10, 2007 10:37 am
- Forum: Early model JD crawler technical support
- Topic: 2010 fuel system question
- Replies: 8
- Views: 7688
The parts manual may be as helpful, because it provides a detailed schematic of this system as well. I don't remember but the routing may not be shown in that so it is good you are getting the service manual. The pictures I posted are off a diesel loader; the setup on my loader is very similar but n...
- Wed Jan 10, 2007 8:39 am
- Forum: Early model JD crawler technical support
- Topic: 2010 fuel system question
- Replies: 8
- Views: 7688
- Tue Jan 09, 2007 6:45 pm
- Forum: Show & Tell
- Topic: 2010 fuel system?
- Replies: 2
- Views: 5586
I think I may have some.....realize there were two different fuel line setups depending on the S/N. I think the routing from the injector pump is similar for both however. These are from a parts machine that I was looking at; thus the machine is in poor condition and some of the filters and such are...
- Tue Jan 09, 2007 2:02 pm
- Forum: Show & Tell
- Topic: Two 1959 JD 440s at work
- Replies: 7
- Views: 10674
- Tue Jan 09, 2007 9:09 am
- Forum: Early model JD crawler technical support
- Topic: Dry Steering Clutch Storage Question
- Replies: 4
- Views: 4592
- Mon Jan 08, 2007 1:52 pm
- Forum: Early model JD crawler technical support
- Topic: Dry Steering Clutch Storage Question
- Replies: 4
- Views: 4592
Well, I was wondering about that for my 2010. It threw one of its tracks just before the holidays, and I had to let it sit in place since it is on a slope. Of course, we got 18+" of snow in December and some rain to boot. I went down yesterday and tried to put the track back on, but the ground is so...
- Mon Jan 08, 2007 11:34 am
- Forum: Early model JD crawler technical support
- Topic: Dry Steering Clutch Storage Question
- Replies: 4
- Views: 4592
Dry Steering Clutch Storage Question
Hi- I think someone on here mentioned that when tey are going to put their crawler with dry clutches in storage, they will tie back the steering levers to disengage the clutches and further protect them from becoming frozen (stuck). I was wondering how this would impact the clutch parts (i.e. would ...
- Wed Jan 03, 2007 5:02 pm
- Forum: Late model JD crawler technical support
- Topic: another 450 question
- Replies: 7
- Views: 9969
It didn't take me nearly as long as I thought- Digitup was the poster that stated it. I have provided a link to the two relevant threads below: http://www.jdcrawlers.com/messageboard/viewtopic.php?t=1286&highlight=450b+wet+clutches http://www.jdcrawlers.com/messageboard/viewtopic.php?t=931&start=0 D...
- Wed Jan 03, 2007 4:56 pm
- Forum: Late model JD crawler technical support
- Topic: another 450 question
- Replies: 7
- Views: 9969
I think someone on here previously had stated that there were a very few (late serial number) B's that had wet clutches- but since I don't know that for sure I won't swear to it. I'll try to find the post that stated it- it may have been on another crawler site I go to so it may take me a little bit...
- Wed Jan 03, 2007 11:35 am
- Forum: Early model JD crawler technical support
- Topic: 420c direction reverser s/n 115xxx
- Replies: 2
- Views: 3514
- Tue Jan 02, 2007 3:33 pm
- Forum: Show & Tell
- Topic: A Blade full of snow
- Replies: 18
- Views: 21139
- Thu Dec 28, 2006 10:12 am
- Forum: Show & Tell
- Topic: 1010CA Rebuild Project Part III
- Replies: 4
- Views: 6742