JDcrawlers Messageboard

You should be able to find that seal at your local parts store or a bearing and seal store. In my 42 years in the parts business I had good luck interchanging NOK numbers to National, CR or other brands.

should work fine

I had to split my 450 plain for the same problem. the transmission pump seal was leaking.

I had my radiator for a 450 plain re-cored at a local radiator shop. Cost was 887.00 if I remember correctly.

oldmetalmender I think I sent you a pm. My first attempt to send one lol. If you don't receive it let me know and I'll try again.

oldmetalmender Thanks for your reply. I envy you for being able to do metal work. I'm pretty handy at mechanical stuff, but have never tried any metal work. I might give it a try one day.
' I would probably want the tool tray and straps. I think I can make the board myself.

oldmetalmender: Would you be interested in making more of the tool trays if you had the demand? Do you have a ballpark estimate what they would cost? I know I'd like to have one.

My 450 plain has a model # 7377N alt with a regulator mounted on the back side. You could google that # and see if it looks like yours and find a matching voltage regulator just for a cost comparison.

Permatex makes good sealer for when a gasket is not available. Any NAPA, Advance, ect. has it.

Thanks Jim

The reason I was asking is while in the process of changing hyd filters the catalog lists a long and short filter with a ser # break. Mine has the long one (9 1/2 in I think) but didn't have the spring nd spacer on the bolt. I just wondered if this is correct. The bolt tightend the filter up snug an...

I have a 450 plain and I just had my radiator re-cored at a local rad shop for 885.00 including 7% sales tax. After about 2 weeks searching on internet the least I found a radiator for was 1500.00.

Does anyone know where the serial number plate is located on a 6405 dozer? Is there a serial number break down by year?

Tie a string to your wrenches so when you drop them you can fish them out. Worked for me. LOL

Mine has thick washers that fit the hole flush with the outside.