Search found 6 matches
- Sat Aug 12, 2017 4:57 pm
- Forum: Early model JD crawler technical support
- Topic: 3pt toplink lengths
- Replies: 4
- Views: 4365
Re: 3pt toplink lengths
I would be interested. Can you send a photo to my email roo275@centurylink.net Thanks, Stan
- Thu Aug 10, 2017 9:58 am
- Forum: Early model JD crawler technical support
- Topic: 3pt toplink lengths
- Replies: 4
- Views: 4365
3pt toplink lengths
Can anyone provide me the minimum and max lengths of the toplink. I will have to try to make one from regular toplink parts, Thanks, Stan
- Sat Jun 24, 2017 7:51 am
- Forum: Early model JD crawler technical support
- Topic: front blade offset
- Replies: 4
- Views: 3712
Re: front blade offset
Thanks, the frame center pivot just looks off center from the tracks when viewing from the front so I was not sure
- Wed Jun 21, 2017 6:10 pm
- Forum: Early model JD crawler technical support
- Topic: front blade offset
- Replies: 4
- Views: 3712
front blade offset
Hello, I have a 40C with a factory 61 frame and an unattached different brand 6ft blade with no mounting references. Did the 61 blade have an offset to center itself to the tracks or is the front blade centered to the lift frame bracket/front pivot bolt? Thanks,
Stan
Stan
- Sun Nov 13, 2016 6:07 pm
- Forum: Early model JD crawler technical support
- Topic: 420 pto coupler on 40 3pt conversion
- Replies: 4
- Views: 3808
Thanks for the info. The reason that I picked up the 420 cover was for the extra stud bosses for the rockshaft support piece. I now see the differences in the pto and coupling. After I removed my original 40C rear cover I have found a small crack so it cannot be used again. My only option now is to ...
- Fri Nov 11, 2016 8:26 pm
- Forum: Early model JD crawler technical support
- Topic: 420 pto coupler on 40 3pt conversion
- Replies: 4
- Views: 3808
420 pto coupler on 40 3pt conversion
Hello, while adding a complete 3pt setup onto a 4 roller 40C. I have the 420 rear transmission cover but seems the cotter pin style 40 pto coupler is different for the seal on the later cover. Any help would be appreciated. Thanks, Stan