Search found 11 matches

by DBaker98
Thu Jul 18, 2019 6:42 am
Forum: Late model JD crawler technical support
Topic: 450c loader in NC
Replies: 1
Views: 1820

450c loader in NC

FYI....JD450c loader on Craigslist in Raleigh NC 5900.00. Tractor has Backhoe attachment
by DBaker98
Wed Jun 06, 2018 11:06 am
Forum: Late model JD crawler technical support
Topic: JD 450C final drive sprocket bearings
Replies: 7
Views: 6288

Re: JD 450C final drive sprocket bearings

Is it a loader or dozer
by DBaker98
Thu Apr 12, 2018 6:17 am
Forum: Late model JD crawler technical support
Topic: Value time
Replies: 7
Views: 5352

Re: Value time

I picked up a local '78 450c loader for $3500.00. It had not been used in years and hour meter read 1234.5. Go figure, like someone disconnected it on purpose. Machine had more hours than was shown. The right final drive had issues as the sprocket hub was rubbing the rail. I new the bearings were go...
by DBaker98
Tue Mar 27, 2018 1:54 pm
Forum: Late model JD crawler technical support
Topic: 450c fuel tank sump
Replies: 12
Views: 8982

Re: 450c fuel tank sump

Yeah I had same issue with mine. It would run 30 mins and die. Had to clean fuel filter every time. I removed the fuel line and drain petcock and stuck the pressure washer in it. Clean as a whistle now. And that was several hours ago. Grass still doesn't grow where I cleaned it. Good for 30 more yea...
by DBaker98
Tue Mar 27, 2018 1:53 pm
Forum: Late model JD crawler technical support
Topic: 450c fuel tank sump
Replies: 12
Views: 8982

Re: 450c fuel tank sump

Yeah I had same issue with mine. It would run 30 mins and die. Had to clean fuel filter every time. I removed the fuel line and drain petcock and stuck the pressure washer in it. Clean as a whistle now. And that was several hours ago. Grass still doesn't grow where I cleaned it. Good for 30 more yea...
by DBaker98
Sun Feb 11, 2018 7:18 am
Forum: Late model JD crawler technical support
Topic: 450C how to bar over engine?
Replies: 12
Views: 10698

Re: 450C how to bar over engine?

You can remove timing pin at flywheel on left side of engine and turn it with a small bar 1 tooth at a time.
by DBaker98
Thu Jun 15, 2017 1:08 pm
Forum: Late model JD crawler technical support
Topic: Another fuel problem 450C trackloader
Replies: 20
Views: 16896

Re: Another fuel problem 450C trackloader

Had my 450c IP rebuilt and cost 700.00. The man said he did 3 a day...... I am in the wrong business
by DBaker98
Tue Apr 11, 2017 5:33 pm
Forum: Late model JD crawler technical support
Topic: Engine
Replies: 9
Views: 8164

Low oil pressure can be associated to balancer bushings which cannot be addressed with in frame rebuild. You will need to pull engine for access.
by DBaker98
Sat Feb 04, 2017 6:09 am
Forum: Late model JD crawler technical support
Topic: Straight 450 frame repair. Any experience/ideas?
Replies: 8
Views: 8407

My clutch disintegrated so had to remove the engine. Then discovered both my rails were broke. Removing the engine and rails I found several broke bolts. Puddle welded sacrificial nuts to the broke studs and were able to remove them. So far holding up good [/img]
by DBaker98
Sat Apr 02, 2016 7:28 am
Forum: Late model JD crawler technical support
Topic: 450c Final Drive parts
Replies: 1
Views: 2557

450c Final Drive parts

Hello All, my '78 450c loader right side final drive has failed. Removed the track and found that the outer drive bearing was destroyed. Removed final drive assembly to find teeth from bull gear and pinion shaft laying in the bottom of final drive oil pan. The loose teeth had broken 3 holes in the c...