JDcrawlers Messageboard

Just read post on 450 block heater, used link for JD Parts Catalog. It shows T19006 for master pin and A378R for the clip. Does everybody agree?? I don't trust by cyber space skills.

Anybody have part number for track master pin and retainer clip for JD 350? The parts guys at our local dealership are the cell phone type and wouldn't have a clue how to look for this. Pin diameter is 1.180"

Thanks in advance,
Tom

Found a junkyard in Punxsutawney, PA that has 2 - 40C 4 roller machines (more or less), engines are trash but lot of other good parts. He is trying to get parts into hands of people that can use instead just scrapping. Give him a call - Guss Manners @ 814-952-1399. Seems like a right good guy!

Thanks, Lavoy. Price on shaft and seals, bushings if you have them?

My 40C is a 5 roller, pulled one front idler (19") due to slop. Parts book calls for 2 bushings M 2266 T. OK, got one bushing out, number stamped on outside surface M2234T, underneath was stamped J.B.-T. Can anybody explain the difference in the numbers. Bore in idler is 2.187. OD of idler shaft (in...

Thanks for all the info!

I take it that the 40 & 420 sprockets are interchangeable as far as the axle hub?

I have a'54 4 roller and a 5 roller 40C. Tracks on the 4 roller are fair, tracks on 5 roller bad wore out. The 5 roller frame is going to get a restored drive train so I need to do something about tracks. Either pin & bush the 5 roller tracks or find another set of tracks or find enough pads to leng...