Search found 135 matches

by timmtnman
Sun Dec 20, 2020 1:15 pm
Forum: Late model JD crawler technical support
Topic: 350B Brake Adjusting Bolt Seized
Replies: 11
Views: 489

Re: 350B Brake Adjusting Bolt Seized

Had the same thing happen on mine. Being a rookie owner and working on my first crawler 350B I learned a few things. First I ordered brake bands from Lavoy, got two of them. Replaced the broken one first and put it back together, clutch disc looked good from what I could tell and put it back togethe...
by timmtnman
Fri Dec 04, 2020 4:40 pm
Forum: Late model JD crawler technical support
Topic: 350B winch
Replies: 2
Views: 186

Re: 350B winch

Thanks for the info. I thought I have read on here somewhere that you shouldn't use reverse and the winch at the same time for some reason. I can't remember why though.
by timmtnman
Thu Dec 03, 2020 6:16 pm
Forum: Late model JD crawler technical support
Topic: 350B winch
Replies: 2
Views: 186

350B winch

Can a winch from a 350b be put on a 350 c that doesn't have the reverse gear in it. Thanks
by timmtnman
Wed Oct 21, 2020 5:09 pm
Forum: Late model JD crawler technical support
Topic: 350B turbo
Replies: 3
Views: 304

Re: 350B turbo

Thanks Jim
by timmtnman
Wed Oct 21, 2020 2:12 pm
Forum: Late model JD crawler technical support
Topic: 350B turbo
Replies: 3
Views: 304

350B turbo

Did any of the 350s have a turbo on them.
by timmtnman
Sun Oct 18, 2020 2:26 pm
Forum: Late model JD crawler technical support
Topic: 350B quit running
Replies: 11
Views: 595

Re: 350B quit running

I put a new battery in and fired right up. I charged the other battery all night and only read 7 volts today. Thanks for all of the advice.
by timmtnman
Sat Oct 17, 2020 4:55 pm
Forum: Late model JD crawler technical support
Topic: 350B quit running
Replies: 11
Views: 595

Re: 350B quit running

Thanks for the advice on those things. First thing I checked was the battery. Read 2.7 volts, then checked the cut off switch and it read the same on both terminals. That's as far as I got with it today. Thinking the battery went bad or alternator went bad. I will check the wiring harness connector ...
by timmtnman
Fri Oct 16, 2020 4:19 pm
Forum: Late model JD crawler technical support
Topic: 350B quit running
Replies: 11
Views: 595

Re: 350B quit running

Thanks Jim, I'll check those things out in the morning.
by timmtnman
Fri Oct 16, 2020 3:39 pm
Forum: Late model JD crawler technical support
Topic: 350B quit running
Replies: 11
Views: 595

Re: 350B quit running

Thanks Lavoy, but it has lost power somehow. The starter doesn't turn over at all and I dont see the guages move when you turn the switch on. What wire or wires would cause it to quit all of a sudden with it running.
by timmtnman
Fri Oct 16, 2020 1:38 pm
Forum: Late model JD crawler technical support
Topic: 350B quit running
Replies: 11
Views: 595

350B quit running

I was working working it today and was getting ready to come off the mountain. I had parked it for a minute and when I climbed back on it just quit running and wouldn't do anything. What are some things to look for. First time it's done this since I have owned it. Thanks
by timmtnman
Tue Oct 13, 2020 2:54 pm
Forum: Late model JD crawler technical support
Topic: 450B winch cable
Replies: 3
Views: 353

Re: 450B winch cable

Thanks Jim B
by timmtnman
Mon Oct 12, 2020 5:57 pm
Forum: Late model JD crawler technical support
Topic: 450B winch cable
Replies: 3
Views: 353

450B winch cable

Anyone know of a good place to get winch cable, a hook that slides on the cable and chokers at. Thanks
by timmtnman
Wed Sep 30, 2020 7:39 pm
Forum: Late model JD crawler technical support
Topic: 350B Stalled. Fuel Issue?
Replies: 22
Views: 1183

Re: 350B Stalled. Fuel Issue?

I agree with BTown, just had the same problem on mine and it was the vent tube clogged up. The simplest thing to check is usually one of the last things to look at.
by timmtnman
Sun Sep 20, 2020 12:40 pm
Forum: Late model JD crawler technical support
Topic: 450B shifting speed
Replies: 11
Views: 1094

Re: 450B shifting speed

This write up helped me understand the adjustment better than the book. HLR adjustment nut should be somewhere midway from top to bottom of threads.. OK 1 last time..; first , adjust the clutch bolt to 3 and 3/4" "freeplay" from top of pedal to where you feel the fingers of the clutch contact the th...
by timmtnman
Sun Sep 20, 2020 12:35 pm
Forum: Late model JD crawler technical support
Topic: 450B shifting speed
Replies: 11
Views: 1094

Re: 450B shifting speed

I did the clutch adjustment today and what a big difference it made on the shifting speed. Really smooth now. It was way way off, I dont think it ever disengaged the clutch before. Biggest problem I had was understanding the free travel. After I figured that out everything else was simple. Thanks fo...