Search found 165 matches

by timmtnman
Sat Dec 09, 2023 7:34 pm
Forum: Late model JD crawler technical support
Topic: 400G Owners
Replies: 1
Views: 3863

400G Owners

I am needing the measurements and thickness for the rear belly pan brackets that bolt to the final drives and the bar that goes across. Also the length of the spacers too. Any help on this or where I can purchase at a scape yard is greatly appreciated.
by timmtnman
Wed Oct 04, 2023 10:14 am
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 4
Views: 1838

Re: 400G

Thanks Jim
by timmtnman
Tue Oct 03, 2023 5:53 pm
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 4
Views: 1838

Re: 400G

Jim, I looked for the part and part numbers and was unable to find them on jd parts site.
by timmtnman
Tue Oct 03, 2023 4:38 pm
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 4
Views: 1838

400G

I am looking for the rear mounting brackets and bar that the belly pan attaches to if anyone has one available. This dozer has a winch also. Thanks
by timmtnman
Sun Oct 23, 2022 1:12 pm
Forum: Late model JD crawler technical support
Topic: 400G radiator shroud
Replies: 3
Views: 2215

Re: 400G radiator shroud

Thanks, I will check and see what they have.
by timmtnman
Sat Oct 22, 2022 1:44 pm
Forum: Late model JD crawler technical support
Topic: 400G radiator shroud
Replies: 3
Views: 2215

Re: 400G radiator shroud

Still looking for a shroud. Anyone have any source's they can share. Junkyards or such. Thanks
by timmtnman
Sun Oct 09, 2022 10:55 am
Forum: Late model JD crawler technical support
Topic: 400G radiator shroud
Replies: 3
Views: 2215

400G radiator shroud

Looking for a radiator shroud AT 120485 if anyone has one available please let me know. 828 508 6153 Thanks
by timmtnman
Sun Jul 17, 2022 4:54 pm
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 5
Views: 2396

Re: 400G

Would a winch with log arch and the output shaft from the dozer from a 450B or 450C fit on the 400G
by timmtnman
Sat Jul 16, 2022 8:12 pm
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 5
Views: 2396

Re: 400G

Thanks
by timmtnman
Sat Jul 16, 2022 7:57 pm
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 5
Views: 2396

Re: 400G

Thanks Jim B, what size winch did they put on it. The tag is missing on this one.
by timmtnman
Sat Jul 16, 2022 10:39 am
Forum: Late model JD crawler technical support
Topic: 400G
Replies: 5
Views: 2396

400G

Where's a good place to get all printed manuals. Already checked with Lavoy and he doesn't have them. Thanks
by timmtnman
Mon Jan 17, 2022 5:56 am
Forum: Late model JD crawler technical support
Topic: 450C don't move
Replies: 6
Views: 3283

Re: 450C don't move

Thanks for the detailed information.
by timmtnman
Sun Jan 16, 2022 1:51 pm
Forum: Late model JD crawler technical support
Topic: 450C don't move
Replies: 6
Views: 3283

Re: 450C don't move

Thanks for the insight on this. It does roll so brakes aren't the problem. What's an estimated cost on the reverser if you go deep into it.
by timmtnman
Fri Jan 14, 2022 7:51 pm
Forum: Late model JD crawler technical support
Topic: 450C don't move
Replies: 6
Views: 3283

450C don't move

Looking to buy a 1981 450C. It runs good but doesn't move. He says it builds pressure but blows the cooler hose off when the clutch is released. Any ideas what would cause this to happen or is something major wrong inside it. Would like to know what I'm up against if I buy it. Thanks
by timmtnman
Fri Oct 08, 2021 6:12 pm
Forum: Early model JD crawler technical support
Topic: John Deere 420c steering clutch slipping issues
Replies: 15
Views: 9581

Re: John Deere 420c steering clutch slipping issues

If it was slipping before the adjustment and is slipping after adjustment I would consider replacing everything while you have it apart. Then you know everything is new and is going to work a long time. Just my thoughts on it