Search found 165 matches
- Sat Dec 09, 2023 7:34 pm
- Forum: Late model JD crawler technical support
- Topic: 400G Owners
- Replies: 1
- Views: 8802
400G Owners
I am needing the measurements and thickness for the rear belly pan brackets that bolt to the final drives and the bar that goes across. Also the length of the spacers too. Any help on this or where I can purchase at a scape yard is greatly appreciated.
- Wed Oct 04, 2023 10:14 am
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 4
- Views: 2026
Re: 400G
Thanks Jim
- Tue Oct 03, 2023 5:53 pm
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 4
- Views: 2026
Re: 400G
Jim, I looked for the part and part numbers and was unable to find them on jd parts site.
- Tue Oct 03, 2023 4:38 pm
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 4
- Views: 2026
400G
I am looking for the rear mounting brackets and bar that the belly pan attaches to if anyone has one available. This dozer has a winch also. Thanks
- Sun Oct 23, 2022 1:12 pm
- Forum: Late model JD crawler technical support
- Topic: 400G radiator shroud
- Replies: 3
- Views: 2427
Re: 400G radiator shroud
Thanks, I will check and see what they have.
- Sat Oct 22, 2022 1:44 pm
- Forum: Late model JD crawler technical support
- Topic: 400G radiator shroud
- Replies: 3
- Views: 2427
Re: 400G radiator shroud
Still looking for a shroud. Anyone have any source's they can share. Junkyards or such. Thanks
- Sun Oct 09, 2022 10:55 am
- Forum: Late model JD crawler technical support
- Topic: 400G radiator shroud
- Replies: 3
- Views: 2427
400G radiator shroud
Looking for a radiator shroud AT 120485 if anyone has one available please let me know. 828 508 6153 Thanks
- Sun Jul 17, 2022 4:54 pm
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 5
- Views: 2552
Re: 400G
Would a winch with log arch and the output shaft from the dozer from a 450B or 450C fit on the 400G
- Sat Jul 16, 2022 8:12 pm
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 5
- Views: 2552
Re: 400G
Thanks
- Sat Jul 16, 2022 7:57 pm
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 5
- Views: 2552
Re: 400G
Thanks Jim B, what size winch did they put on it. The tag is missing on this one.
- Sat Jul 16, 2022 10:39 am
- Forum: Late model JD crawler technical support
- Topic: 400G
- Replies: 5
- Views: 2552
400G
Where's a good place to get all printed manuals. Already checked with Lavoy and he doesn't have them. Thanks
- Mon Jan 17, 2022 5:56 am
- Forum: Late model JD crawler technical support
- Topic: 450C don't move
- Replies: 6
- Views: 3416
Re: 450C don't move
Thanks for the detailed information.
- Sun Jan 16, 2022 1:51 pm
- Forum: Late model JD crawler technical support
- Topic: 450C don't move
- Replies: 6
- Views: 3416
Re: 450C don't move
Thanks for the insight on this. It does roll so brakes aren't the problem. What's an estimated cost on the reverser if you go deep into it.
- Fri Jan 14, 2022 7:51 pm
- Forum: Late model JD crawler technical support
- Topic: 450C don't move
- Replies: 6
- Views: 3416
450C don't move
Looking to buy a 1981 450C. It runs good but doesn't move. He says it builds pressure but blows the cooler hose off when the clutch is released. Any ideas what would cause this to happen or is something major wrong inside it. Would like to know what I'm up against if I buy it. Thanks
- Fri Oct 08, 2021 6:12 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch slipping issues
- Replies: 15
- Views: 9966
Re: John Deere 420c steering clutch slipping issues
If it was slipping before the adjustment and is slipping after adjustment I would consider replacing everything while you have it apart. Then you know everything is new and is going to work a long time. Just my thoughts on it