Search found 40 matches
- Fri Dec 15, 2017 12:00 pm
- Forum: Late model JD crawler technical support
- Topic: My 450C in action
- Replies: 5
- Views: 5389
Re: My 450C in action
I normally do it that way too, but i was holding phone in one hand. The machine is a lot more powerful than I imagined. I really enjoy it and it's very efficient on fuel.
- Wed Dec 13, 2017 9:30 am
- Forum: Late model JD crawler technical support
- Topic: My 450C in action
- Replies: 5
- Views: 5389
My 450C in action
Knocking out a few trees.
https://www.youtube.com/watch?v=nfNufFNtFcQ
https://www.youtube.com/watch?v=nfNufFNtFcQ
- Tue Dec 12, 2017 12:14 pm
- Forum: Late model JD crawler technical support
- Topic: 450C hydraulic pump removal
- Replies: 22
- Views: 18038
Re: 450C hydraulic pump removal
I have a 450c dozer and a 310c backhoe. They are very similar if not the same engines. My 310c was leaking badly fromthe "pump", found out it was the steel line going into pump..Disconnected line and welded small crack with mig. Hopefully you dont need to remove pump.
- Fri Sep 08, 2017 3:13 pm
- Forum: Late model JD crawler technical support
- Topic: Looking for 450c limb risers
- Replies: 13
- Views: 9349
Re: Looking for 450c limb risers
Fortunately I have a hydraulic pipe bender that will bend it. I was thinking of making mount tabs bolted to the nose where I can put a bolt or pin thru them. I will send pics once I get on it.
- Fri Sep 08, 2017 8:33 am
- Forum: Late model JD crawler technical support
- Topic: Looking for 450c limb risers
- Replies: 13
- Views: 9349
Re: Looking for 450c limb risers
My 450c didn't come with any, but I am going to fabricate some with 2 3/8" pipe. It doesn't seem difficult to do.
- Wed Jun 28, 2017 8:09 am
- Forum: Late model JD crawler technical support
- Topic: new member intro, 450C in northern MS
- Replies: 18
- Views: 12386
Re: new member intro, 450C in northern MS
Welcome!! I have an '81 450C that I purchased last year. I just got around to changing all the fluids. Make sure when you change the transmission fluid that you remove and clean the screen filter on the right lower side of tranny. Its held in there by 3 bolts. Also make sure you get the o-rings befo...
- Wed Mar 22, 2017 8:08 am
- Forum: Late model JD crawler technical support
- Topic: JD 450C brake adjustment
- Replies: 1
- Views: 2288
- Wed Feb 22, 2017 9:17 am
- Forum: Late model JD crawler technical support
- Topic: My recent purchase getting life extended-I hope
- Replies: 9
- Views: 7095
- Wed Dec 07, 2016 10:12 am
- Forum: Late model JD crawler technical support
- Topic: test
- Replies: 2
- Views: 2753
- Tue Nov 15, 2016 9:04 am
- Forum: Late model JD crawler technical support
- Topic: Lubricants for a 450C
- Replies: 5
- Views: 5087
- Wed Oct 12, 2016 8:50 am
- Forum: Late model JD crawler technical support
- Topic: 350c undercariage parts
- Replies: 10
- Views: 7182
I bought a new aftermarket complete idler assembly for $425 for my 450C from buck and knobby
Toll Free: (855) 213-2825 info@buckandknobby.com 6220 West Sterns Road Ottawa Lake, Michigan 49267
Also I welded on grouser bars on mine, much less expensive than the alternative.
Toll Free: (855) 213-2825 info@buckandknobby.com 6220 West Sterns Road Ottawa Lake, Michigan 49267
Also I welded on grouser bars on mine, much less expensive than the alternative.
- Tue Sep 06, 2016 5:19 pm
- Forum: Late model JD crawler technical support
- Topic: '81 450c left track won't steer
- Replies: 1
- Views: 2394
- Mon Aug 22, 2016 8:34 am
- Forum: Late model JD crawler technical support
- Topic: 450c track problem
- Replies: 5
- Views: 4946
- Fri Jul 15, 2016 8:16 am
- Forum: Late model JD crawler technical support
- Topic: 350 Broken foot brake linkage
- Replies: 14
- Views: 11395
- Mon Jun 27, 2016 9:48 am
- Forum: Late model JD crawler technical support
- Topic: 450C steering is not tight
- Replies: 38
- Views: 26013