Search found 27 matches
- Wed Mar 07, 2018 7:53 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere mc milky oil after valve job
- Replies: 12
- Views: 10822
Re: John Deere mc milky oil after valve job
Thank you all for the knowledge I did fallow the torque procedures 50 then 100 the 140 and retorqued after I ran it for about 15 mins, I used what I thought was a good quality gasket and copper spray. I'll try a new gasket and let everyone know how it turns out. Thank you so much
- Sun Feb 25, 2018 1:11 am
- Forum: Early model JD crawler technical support
- Topic: John Deere mc milky oil after valve job
- Replies: 12
- Views: 10822
John Deere mc milky oil after valve job
Like the title says my mc has milky engine oil after I had the head rebuilt I've changed the oil and filter ran it for about 10 mins oil is still fine two days later it's milky again. Any insight on my issue I didn't have this issue before the head was done they replaced all 4 valves all 4 valve gui...
- Thu Jun 08, 2017 12:22 pm
- Forum: Early model JD crawler technical support
- Topic: Jd mc
- Replies: 7
- Views: 6337
Re: Jd mc
I took the top cover off and it seems to be a little wet down inside the final drive. Im thinking i need new seals as well. When i pull back on the right stick the crawler wont turn until its almost fully pulled back
- Fri Jun 02, 2017 6:59 pm
- Forum: Early model JD crawler technical support
- Topic: Jd mc
- Replies: 7
- Views: 6337
Jd mc
Im sure its on here somewhere but my child is in need of a transplant so he will turn right. Im almost positive my right hand steering clutch is about to go. It doesnt start engaging until the stick is about 1 inch from full back position the left hand stick engages within an inch of neutral positio...
- Tue Aug 16, 2016 12:47 pm
- Forum: Early model JD crawler technical support
- Topic: Mc 1000 tool carrier
- Replies: 6
- Views: 6521
Mc 1000 tool carrier
I have a mc 1000 tool carrier and I can't seem to get the tool bar pitch set, the adjustment levers seem to be seized up and or broken does anyone know where I can get parts for it?
- Sun Aug 07, 2016 9:12 pm
- Forum: Early model JD crawler technical support
- Topic: Another 52 mc question
- Replies: 28
- Views: 21869
- Wed Aug 03, 2016 5:01 pm
- Forum: Early model JD crawler technical support
- Topic: Track adjuster problem
- Replies: 8
- Views: 7386
- Tue Aug 02, 2016 8:16 pm
- Forum: Early model JD crawler technical support
- Topic: Track adjuster problem
- Replies: 8
- Views: 7386
- Tue Aug 02, 2016 8:13 pm
- Forum: Early model JD crawler technical support
- Topic: Track adjuster problem
- Replies: 8
- Views: 7386
- Tue Aug 02, 2016 4:48 pm
- Forum: Early model JD crawler technical support
- Topic: Another 52 mc question
- Replies: 28
- Views: 21869
- Tue Aug 02, 2016 4:19 pm
- Forum: Early model JD crawler technical support
- Topic: Another 52 mc question
- Replies: 28
- Views: 21869
- Tue Aug 02, 2016 3:51 pm
- Forum: Early model JD crawler technical support
- Topic: Another 52 mc question
- Replies: 28
- Views: 21869
https://lancaster.craigslist.org/grd/5710672256.html
Found this today if anyone is interested in think it's a little much for it but I'm sure someone will pay that.
Found this today if anyone is interested in think it's a little much for it but I'm sure someone will pay that.
- Mon Aug 01, 2016 7:52 pm
- Forum: Early model JD crawler technical support
- Topic: Track adjuster problem
- Replies: 8
- Views: 7386
The part that is coming off is part 30B If I'm looking at the parts book correctly http://s1249.photobucket.com/user/Jcastigl/media/Mobile%20Uploads/20160801_214454_zpsloi8m5z0.jpg.html?filters[user]=145448566&filters[recent]=1&sort=1&o=2[/img] http://s1249.photobucket.com/user/Jcastigl/media/Mobile...
- Mon Aug 01, 2016 7:36 pm
- Forum: Early model JD crawler technical support
- Topic: Track adjuster problem
- Replies: 8
- Views: 7386
Track adjuster problem
Well I was washing the mc today took me 4 hours to clean all the fragmitas and mud out from the undercarriage not a happy camper. Well straight to the point I noticed that my left inside track adjuster is coming off of its guide. It's some what on the flat part twards the front of the tractor but th...
- Sun Jul 31, 2016 1:08 pm
- Forum: Early model JD crawler technical support
- Topic: Parts 1010
- Replies: 3
- Views: 3655
It figures I post it on here and now it's down there is a 440 on Lancaster Craigslist though it is in parts. https://lancaster.craigslist.org/grd/5684415441.html