Search found 41 matches

by AddamsonFlint
Sun Jul 04, 2021 5:50 pm
Forum: Late model JD crawler technical support
Topic: Bucket-return circuit delete help needed for my 350C rewire op
Replies: 8
Views: 4644

Re: Bucket-return circuit delete help needed for my 350C rewire op

So, part of the complete system overhaul was an entire new pump. New coupler, new hoses, new fittings, front to back top to bottom. 1" supply and 1-1/4" return, 36 GPM high flow pump, and yeah...it's pumpin' :D lol.
by AddamsonFlint
Sun Jul 04, 2021 3:38 pm
Forum: Late model JD crawler technical support
Topic: Bucket-return circuit delete help needed for my 350C rewire op
Replies: 8
Views: 4644

Re: Bucket-return circuit delete help needed for my 350C rewire op

I don't know if this added context possibly matters- but I just finished also re-running the entire hydraulic system. Maybe when fully drained, that solenoid valve/flap/ball/etc closed? Because, I can't think of another culprit not allowing my cylinders to move.
by AddamsonFlint
Sun Jul 04, 2021 2:55 pm
Forum: Late model JD crawler technical support
Topic: Bucket-return circuit delete help needed for my 350C rewire op
Replies: 8
Views: 4644

Re: Bucket-return circuit delete help needed for my 350C rewire op

I just put a picture in the Google drive folder in the link up top. I think I have to repower the solenoid, which is currently closed. But I wonder if then I can depower open, and just leave it unhooked.
by AddamsonFlint
Sun Jul 04, 2021 2:45 pm
Forum: Late model JD crawler technical support
Topic: Bucket-return circuit delete help needed for my 350C rewire op
Replies: 8
Views: 4644

Re: Bucket-return circuit delete help needed for my 350C rewire op

No, simple is good lol. But so, let's say I never want it, so it can be always open. So maybe I need some simple u-bridge wire between two points to complete the circuit? But if I never put that circuit back in, I don't know what I would be gapping.
by AddamsonFlint
Sun Jul 04, 2021 2:35 pm
Forum: Late model JD crawler technical support
Topic: Wire harness JD 350 ?
Replies: 5
Views: 3994

Re: Wire harness JD 350 ?

I can't speak to the purchase options, but the wiring was simple enough, I just said F-it and ran new single wires for the lines. There's an L-bracket harness connector point. I actually just drilled it out and ran new wire through, keeping the same/correct hole locations. Some cable ties, clean-up ...
by AddamsonFlint
Sun Jul 04, 2021 2:26 pm
Forum: Late model JD crawler technical support
Topic: Bucket-return circuit delete help needed for my 350C rewire op
Replies: 8
Views: 4644

Bucket-return circuit delete help needed for my 350C rewire op

Hey guys, I just went through and did a much needed rewire on my 350C. I found the pressure switch coiled up behind the dash, and the bucket-return disabled, which actually I was veeery thankful for- I fucking hate that function. So, re-ran all new wire, cleaned everything up, reset the gauges in th...
by AddamsonFlint
Sun Nov 08, 2020 8:05 pm
Forum: Late model JD crawler technical support
Topic: Tips for hydraulic bleed after full system swap?
Replies: 2
Views: 2061

Re: Tips for hydraulic bleed after full system swap?

Thank you sir, good tips always from you. Totally dig the dry crank first, rather than a fully raging pump right off the rip. The system is fully new and without a drop. But after as long as this took, a few extra minutes ain't bad.
by AddamsonFlint
Sun Nov 08, 2020 1:49 pm
Forum: Late model JD crawler technical support
Topic: Tips for hydraulic bleed after full system swap?
Replies: 2
Views: 2061

Tips for hydraulic bleed after full system swap?

Never done it before, but going to fire up system today.

If anyone can point me in the direction of a tutorial or video, or even some tips, please let me know.

Otherwise, I'm assuming just carefully crack fittings all around?
by AddamsonFlint
Sat Nov 07, 2020 8:18 pm
Forum: Late model JD crawler technical support
Topic: H-flow pump puttin, total new lines havin- 1st time doin
Replies: 7
Views: 4965

Re: H-flow pump puttin, total new lines havin- 1st time doin

Hey Jim, I just happened to have the gate valve. I saw a video talking about having all metal (which it does) and not having to worry about rotting seals. However, while I'm pretty sure it fully opens, that was a great observation. Since I'm not 100%, I will definitely double-check. It's 1.25" for t...
by AddamsonFlint
Sat Nov 07, 2020 3:28 pm
Forum: Late model JD crawler technical support
Topic: H-flow pump puttin, total new lines havin- 1st time doin
Replies: 7
Views: 4965

H-flow pump puttin, total new lines havin- 1st time doin

Hey friends, I haven’t done such a total redo before in this space. I’m remounting the pump for final fitment tonight, and tightening down the system to start test flow. I have a google drive folder of some pics, link below. https://drive.google.com/drive/folders/1cqjLokQ_2N-uRzZrkAQZW5YPDglVNxNp?us...
by AddamsonFlint
Wed Oct 14, 2020 1:32 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: No universal track chain options? Build or buy no brainer?
Replies: 4
Views: 3567

No universal track chain options? Build or buy no brainer?

So, I’ve been hunting the interwebs high and low, and amazed to not find one dude on the planet doing this. After all, it’s just links and pins. Sprocket tooth specs, the only variation factor Run a couple different width options, at a couple different tooth gaps, and you’ve got the universal track ...
by AddamsonFlint
Thu Oct 08, 2020 1:24 pm
Forum: Late model JD crawler technical support
Topic: Basic loader control valve flow-direction question...
Replies: 6
Views: 4023

Re: Basic loader control valve flow-direction question...

The difference in $ was literally a few bucks, so hard for me not too. While one can always limit pressure down, more can't be made if you need it. I am also plumbing a multi-attach setup in back to run other aux hydraulics. I have replaced all my 1/2 hoses, 1" output, 1.25" return, all new hose and...
by AddamsonFlint
Wed Oct 07, 2020 11:36 am
Forum: Late model JD crawler technical support
Topic: Basic loader control valve flow-direction question...
Replies: 6
Views: 4023

Re: Basic loader control valve flow-direction question...

My challenge was fitting in new and bigger lines. Needed to swap out my pump, and selected this: https://www.surpluscenter.com/Hydraulics/Hydraulic-Pumps/Gear-Pumps/5-43-cu-in-Dynamic-GP-F25-89-S13-A-Hydraulic-Pump-9-12249-C.axd https://www.baileyhydraulics.com/pdf/GP-F25.pdf Lower pressure with the...
by AddamsonFlint
Tue Oct 06, 2020 1:44 pm
Forum: Late model JD crawler technical support
Topic: Trans-reverser joiner-stud snap :( how the F...
Replies: 8
Views: 4896

Re: Trans-reverser joiner-stud snap :( how the F...

Awesome sir, and thank you again for the help. Greatly appreciated.