JDcrawlers Messageboard

Thanks Jim, looks like Surplus Center may have something. Good call, thanks for the input.
Roger

Seeking any suggestions for cylinder replacements on a 40c mated to a 420 undercarriage. The old ones are 3 in. Bore 1 1/4 shaft, 24 in. Retracted and 34 in. Extended. Thanks.
Roger

I agree Lavoy, I'm thinking something got bent, I did have to straighten parts of the lever the t bolt goes in. When I tightened the adjusting nut the t bolt came up and contacted the lever preventing anymore adjusting, that's when I looked at the right hand side to see how many threads were above t...

Thanks Paul, can't start on it for a couple of weeks, I like your pictures so I'll post some when I can. I was wondering how to get the final to clear the track frame just like your picture showed. I will study your post and hopefully figure it out. Thanks for your input, Roger.

The right hand steering clutch works however it's way out of adjustment. There's a rather loud click sound when you pull the steering lever, and there are posts about that. There's also some oil present so probably looking at clutch rebuild and a new seal.

Yes, I realize the two adjustments. I just wanted to compare what the right hand side looked like, I wanted to fix the left hand side first before opening up the right hand one. The band was a reconditioned at 10566 t same as original. The original wasn't that bad but did have groves cut in from rub...

Hello, I inherited a 40/420 crawler, I believe it is mostly a 40c with a 420 five roller under carriage and transmission. I have no steering on the left side. I peeked inside the clutch housing and could see that the brake band had slipped toward the inside off the drum. After unable to pry it back ...