JDcrawlers Messageboard

Lavoy
The information should be in your inbox

How can I go about ordering it

Lavoy
Do you sell the template used th adjust the fingers on the steering clutch pressure plate

Thank you I checked with Deere and they think they may be able to get but are not sure

Lavoy
The part number I need is 875T serial number 16835. It is a snap ring with the inside size of1.281 wire size is .130 according to JD

I believe I do I have 6 fibers and 5 steel disc. I am missing the c-ring that holds the gear on the shaft. I removed the c-ring from the other side and installed it on the left. Reassembled the left housing and when I tightened it up the axle stopped turning

Lavoy
Do you happen to sell the C-clip for the shaft that comes out of the drive case to the axle. I believe it is part number 7 on the drawing. It keeps the gear from slipping out of the clutches

I have disassembled it again and verified that all components are stacked in correctly the only thing left could be the pressure plate adjustment. I believe that the spring clips on the pressure plate are rubbing. Again I get a grind from no gear enguagement when I put it in second gear and let out ...

Folks thanks for the input. I could have been a little clearer with my original post. I will try to answer your questions. My Crawler was running with no drive train issues except the brake issue. I originally was just going to repair the brake band. It would go into and operate in any gear. I made ...

Help. I am in the process of repairing my steering clutches and brake rings on my MC crawler. I have replaced the metal and fiber and brake bands. It seemed pretty simple until I reinstalled both sides back on the crawler. Now when i tighten both sides up 2nd gear grinds and will not work and when I...