JDcrawlers Messageboard

Reverser cable was stuck, but i used the air pressure and oil trick I read here, and it freed up overnight. And yes, it moved freely forward ,and back, no binding.

Yes, it rolls quite nicely when being pushed or pulled. I assume either the transmission, or the reverser are about the same amount of work to remove. The thrust washer was torn in half, so something must have jammed, shearing off the teeth, and the thrust washer, maybe a bad bearing, dropping a sha...

This morning, i filled the reverser oil, and anti freeze. She fired right up with the rebuilt injector pump. Purrs like a kitten. I was a little timid as the throttle linkage is a bit wonky, and I had a heavy wire with a hand loop (no key shut off). It is in a corner of the shop just ahead of 16 fee...

Thanks for your knowledge, I figured it was bad, holding the gear teeth was one of those oh S@&# moments. I was kind of hoping that I would have two running units (not that i need two). Well, with a bit of sweat I should be able to build one really good one out of the two, and have a shed full of pa...

Started my 350 basket case for the first time last week, no rad so only a short run. The cooler lines for the reverser were just looped back by previous owner, and when i started it, the loop blew off, and shot out the oil. So, while most of the oil was out anyway, i thought I would change the oil a...

I have read a few of your posts, and sent you a personal message about a log grapple that came with the 350B loader i just bought. I do not have a use for it, and would be willing to trade for a 4 in one bucket to fit the 350. I have had a few calls in response to my ad, and I too would like a 6 way...

http://s1259.photobucket.com/user/01Flatlander/media/JD%20350%20B%20Jan%202017%20005_zpsvg9nxzbb.jpg.html http://s1259.photobucket.com/user/01Flatlander/media/JD%20350%20B%20Jan%202017%20003_zpsdjk18rfk.jpg.html http://s1259.photobucket.com/user/01Flatlander/media/JD%20350%20B%20Jan%202017%20032_zps...

It was the double spacing that worked, and no contractions.

My basket case 350 needs a rad, and some other parts. Wreckers want $650.00 plus freight for just the rad. I found a 350B for $1,200.00. I thought that the parts I need now will fit, and then i will have the whole machine to cannibalize. I know not everything will fit from the straight to the B, but...

I took out all the numbers commas symbols everything but periods and still debug

I edited this post with 6 short sentences no commas no periods no symbols still debug i had a story i wanted to share but hardly worth the effort

Every time i type more than a sentence, i get the de bug response.

My basket case 350 needs a rad, and some other parts

I tried to post yesterday, not long about the size of the screen on the post a new topic page. Came back with debug message. Last time i posted had to split it up into multi messages. Am i dong it wrong, or is it broken?

Thanks,

Doug