Search found 7 matches
- Mon Mar 27, 2017 6:48 am
- Forum: Late model JD crawler technical support
- Topic: Replacing JD350C track adjusters
- Replies: 3
- Views: 2745
Lavoy, Is there really any reason that I could not just disassemble the adjuster and slide it in in two pieces? It seems to me the they are made to me assembled and rebuilt with a seal kit and put back together. As long as I am careful what is the drawback? I understand breaking track is a real pain...
- Sun Mar 26, 2017 11:51 am
- Forum: Late model JD crawler technical support
- Topic: Replacing JD350C track adjusters
- Replies: 3
- Views: 2745
Replacing JD350C track adjusters
So I have old adjusters completely compressed, rear spring removed and idler pulled all the way forward. I have a new set of adjusters from Lavoy. The only way I can see these coming out is in two pieces, is the the right way to do this? Do I also disassemble the new adjuster assemblies and put them...
- Wed Feb 08, 2017 2:32 pm
- Forum: Late model JD crawler technical support
- Topic: New to me 350C needs track adjusters
- Replies: 8
- Views: 6298
- Tue Feb 07, 2017 2:18 pm
- Forum: Late model JD crawler technical support
- Topic: New to me 350C needs track adjusters
- Replies: 8
- Views: 6298
- Tue Feb 07, 2017 10:28 am
- Forum: Late model JD crawler technical support
- Topic: New to me 350C needs track adjusters
- Replies: 8
- Views: 6298
- Tue Feb 07, 2017 7:50 am
- Forum: Late model JD crawler technical support
- Topic: New to me 350C needs track adjusters
- Replies: 8
- Views: 6298
I appreciate the input. Judging by the rest of the adjuster it is more than likely too pitted for the seal fix. I pulled it out in an attempt to get to a clean unpitted area of the cylinder and pumped it up got the track adjusted and it did not hold but 20 minutes of running the dozer. I do not want...
- Mon Feb 06, 2017 11:43 am
- Forum: Late model JD crawler technical support
- Topic: New to me 350C needs track adjusters
- Replies: 8
- Views: 6298
New to me 350C needs track adjusters
First I would like to thank the institutional knowledge of this forum. I have been reading a lot and I just picked up a 1985 JD350C forestry dozer last week. I knew it needed at least one track adjuster, but I have just decided to bite the bullet and buy both of them. It has 1030 hours on it and acc...