JDcrawlers Messageboard

Lavoy,
How much $ are you needing for the shaft/shafts? Looks like there is an abundance of used parts available so I'm gonna do my best not to buy new stuff unless I have to such as seals, bearings, etc
Perry

I'm going to HAVE to replace all of the studs/bolts due to most of them are missing or broken. This poor old tractor has been into before and by the looks of things whoever did it didn't have much of a mechanical background. Mismatched bolts, washers, etc, not to mention the condition of the tractor...

Good afternoon, OK, I finally got around to taking the little dozer apart and found the coupler and the ends of both shafts to be in "poor condition". The tracks were basically what was holding the tractor together as all of the bolts holding the tranny and reverser together were either missing or e...

Hello all, Thanks for the replies. I will be buying a technical manual probably on cd before I go much further. I am ready to pull the engine now so that should come apart in the next week or so (I own a motorcycle shop and stay very busy). Also I am working by myself. Sorry about posting in the wro...

Hello all, I am working on an old 350C dozer that had an issue with the tranny. The under carriage is pretty much worn out however was still running and performing. It was being used to pick rocks out of the ground for a final grade when all of a sudden it POPPED and quit motivating in either direct...

Thank you for the head start. Now I just need a good manual. These manuals are expensive
Pbrogdon

I heard the engine has to come out to get to the tranny. I have also heard that I can get to it from the rear. I will also need a good manual, if anyone knows where I can get a good one or download a good one I would be grateful I am brand new to this forum and joined looking for help. All assistanc...

Good afternoon. I was working a BORROWED JD350C the other day and while working heard a POP and tractor quit moving. Engine still runs but no forward or reverse. Suspect output shaft broken. I am all ears as to how to go about making this repair. I am an experienced mechanic. Pull engine, go at it f...